+1
−0
drivers/irqchip/irq-vf610-mscm-ir.c
0 → 100644
+212
−0
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
This adds support for Vybrid's interrupt router. On VF6xx models, almost all peripherals can be used by either of the two CPU's, the Cortex-A5 or the Cortex-M4. The interrupt router routes the peripheral interrupts to the configured CPU. This IRQ chip driver configures the interrupt router to route the requested interrupt to the CPU the kernel is running on. The driver makes use of the irqdomain hierarchy support. The parent is given by the device tree. This should be one of the two possible parents either ARM GIC or the ARM NVIC interrupt controller. The latter is currently not yet supported. Note that there is no resource control mechnism implemented to avoid concurrent access of the same peripheral. The user needs to make sure to use device trees which assign the peripherals orthogonally. However, this driver warns the user in case the interrupt is already configured for the other CPU. This provides a poor man's resource controller. Acked-by:Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Stefan Agner <stefan@agner.ch> Link: https://lkml.kernel.org/r/1425249689-32354-2-git-send-email-stefan@agner.ch Signed-off-by:
Jason Cooper <jason@lakedaemon.net>
CRA Git | Maintained and supported by SUSTech CRA and CCSE