Commit 042dd60c authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'regulator-v3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator 

Pull regulator fixes from Mark Brown:
 "A few small fixes for v3.10, documentation things in the core and a
  few driver bugs."

* tag 'regulator-v3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: palmas: Fix "enable_reg" to point to the correct reg for SMPS10
  regulator: palmas: Fix incorrect condition
  regulator: core: Correct spelling mistake in comment
  regulator: dbx500: Make local symbol static
  regulator: Fix kernel-doc generation warnings.
parents 0ab60871 dcbd8eec

drivers/regulator/core.c

+5 −2
Original line number Diff line number Diff line
@@ -1539,7 +1539,10 @@ static void regulator_ena_gpio_free(struct regulator_dev *rdev) 
}



/**

 * Balance enable_count of each GPIO and actual GPIO pin control.

 * regulator_ena_gpio_ctrl - balance enable_count of each GPIO and actual GPIO pin control

 * @rdev: regulator_dev structure

 * @enable: enable GPIO at initial use?

 *

 * GPIO is enabled in case of initial use. (enable_count is 0)

 * GPIO is disabled when it is not shared any more. (enable_count <= 1)

 */
@@ -2702,7 +2705,7 @@ EXPORT_SYMBOL_GPL(regulator_get_voltage); 
/**

 * regulator_set_current_limit - set regulator output current limit

 * @regulator: regulator source

 * @min_uA: Minimuum supported current in uA

 * @min_uA: Minimum supported current in uA

 * @max_uA: Maximum supported current in uA

 *

 * Sets current sink to the desired output current. This can be set during

drivers/regulator/dbx500-prcmu.c

+12 −12
Original line number Diff line number Diff line
@@ -24,18 +24,6 @@ 
static int power_state_active_cnt; /* will initialize to zero */

static DEFINE_SPINLOCK(power_state_active_lock);



int power_state_active_get(void)

{

	unsigned long flags;

	int cnt;



	spin_lock_irqsave(&power_state_active_lock, flags);

	cnt = power_state_active_cnt;

	spin_unlock_irqrestore(&power_state_active_lock, flags);



	return cnt;

}



void power_state_active_enable(void)

{

	unsigned long flags;
@@ -65,6 +53,18 @@ out: 


#ifdef CONFIG_REGULATOR_DEBUG



static int power_state_active_get(void)

{

	unsigned long flags;

	int cnt;



	spin_lock_irqsave(&power_state_active_lock, flags);

	cnt = power_state_active_cnt;

	spin_unlock_irqrestore(&power_state_active_lock, flags);



	return cnt;

}



static struct ux500_regulator_debug {

	struct dentry *dir;

	struct dentry *status_file;

drivers/regulator/palmas-regulator.c

+2 −2
Original line number Diff line number Diff line
@@ -840,7 +840,7 @@ static int palmas_regulators_probe(struct platform_device *pdev) 
			break;

		}



		if ((id == PALMAS_REG_SMPS6) && (id == PALMAS_REG_SMPS8))

		if ((id == PALMAS_REG_SMPS6) || (id == PALMAS_REG_SMPS8))

			ramp_delay_support = true;



		if (ramp_delay_support) {
@@ -878,7 +878,7 @@ static int palmas_regulators_probe(struct platform_device *pdev) 
			pmic->desc[id].vsel_mask = SMPS10_VSEL;

			pmic->desc[id].enable_reg =

					PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,

							PALMAS_SMPS10_STATUS);

							PALMAS_SMPS10_CTRL);

			pmic->desc[id].enable_mask = SMPS10_BOOST_EN;

			pmic->desc[id].min_uV = 3750000;

			pmic->desc[id].uV_step = 1250000;

CRA Git | Maintained and supported by SUSTech CRA and CCSE