Commit 041b9a7b authored by Amit Kucheria's avatar Amit Kucheria Committed by Andy Gross
Browse files

arm64: dts: pms405: Export PMIC temperature to thermal framework 



The PMS405 PMIC has an ADC that exposes the on-die temperature that we
wire up to spmi-temp-alarm thermal driver. This allows the PMIC
temperature to be exposed to Linux through the thermal framework.

Signed-off-by: default avatarAmit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: default avatarAndy Gross <andy.gross@linaro.org>
parent 4bbbca1e

arch/arm64/boot/dts/qcom/pms405.dtsi

+79 −0
Original line number Diff line number Diff line
@@ -3,6 +3,32 @@ 


#include <dt-bindings/spmi/spmi.h>

#include <dt-bindings/input/linux-event-codes.h>

#include <dt-bindings/iio/qcom,spmi-vadc.h>

#include <dt-bindings/thermal/thermal.h>



/ {

	thermal-zones {

		pms405 {

			polling-delay-passive = <250>;

			polling-delay = <1000>;



			thermal-sensors = <&pms405_temp>;



			trips {

				pms405_alert0: pms405-alert0 {

					temperature = <105000>;

					hysteresis = <2000>;

					type = "passive";

				};

				pms405_crit: pms405-crit {

					temperature = <125000>;

					hysteresis = <2000>;

					type = "critical";

				};

			};

		};

	};

};



&spmi_bus {

	pms405_0: pms405@0 {
@@ -45,6 +71,59 @@ 
			};

		};



		pms405_temp: temp-alarm@2400 {

			compatible = "qcom,spmi-temp-alarm";

			reg = <0x2400>;

			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;

			io-channels = <&pms405_adc ADC5_DIE_TEMP>;

			io-channel-names = "thermal";

			#thermal-sensor-cells = <0>;

		};



		pms405_adc: adc@3100 {

			compatible = "qcom,pms405-adc", "qcom,spmi-adc-rev2";

			reg = <0x3100>;

			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;

			#address-cells = <1>;

			#size-cells = <0>;

			#io-channel-cells = <1>;



			ref_gnd {

				reg = <ADC5_REF_GND>;

				qcom,pre-scaling = <1 1>;

			};



			vref_1p25 {

				reg = <ADC5_1P25VREF>;

				qcom,pre-scaling = <1 1>;

			};



			vph_pwr {

				reg = <ADC5_VPH_PWR>;

				qcom,pre-scaling = <1 3>;

			};



			die_temp {

				reg = <ADC5_DIE_TEMP>;

				qcom,pre-scaling = <1 1>;

			};



			xo_therm_100k_pu {

				reg = <ADC5_XO_THERM_100K_PU>;

				qcom,pre-scaling = <1 1>;

			};



			amux_thm1_100k_pu {

				reg = <ADC5_AMUX_THM1_100K_PU>;

				qcom,pre-scaling = <1 1>;

			};



			amux_thm3_100k_pu {

				reg = <ADC5_AMUX_THM3_100K_PU>;

				qcom,pre-scaling = <1 1>;

			};

		};



		rtc@6000 {

			compatible = "qcom,pm8941-rtc";

			reg = <0x6000>;

CRA Git | Maintained and supported by SUSTech CRA and CCSE