Commit 040d87f1 authored by Keith Packard's avatar Keith Packard Committed by Eric Anholt
Browse files

drm/i915: Add Display Port register defines 



This adds the register definitions for the display port enable register
along with those for the GMCH and Link M/N ratios required to drive display
port outputs.

Signed-off-by: default avatarKeith Packard <keithp@keithp.com>
Signed-off-by: default avatarEric Anholt <eric@anholt.net>
parent 2245fda8

drivers/gpu/drm/i915/i915_reg.h

+163 −0
Original line number Diff line number Diff line
@@ -638,8 +638,11 @@ 
/* Hotplug control (945+ only) */

#define PORT_HOTPLUG_EN		0x61110

#define   HDMIB_HOTPLUG_INT_EN			(1 << 29)

#define   DPB_HOTPLUG_INT_EN			(1 << 29)

#define   HDMIC_HOTPLUG_INT_EN			(1 << 28)

#define   DPC_HOTPLUG_INT_EN			(1 << 28)

#define   HDMID_HOTPLUG_INT_EN			(1 << 27)

#define   DPD_HOTPLUG_INT_EN			(1 << 27)

#define   SDVOB_HOTPLUG_INT_EN			(1 << 26)

#define   SDVOC_HOTPLUG_INT_EN			(1 << 25)

#define   TV_HOTPLUG_INT_EN			(1 << 18)
@@ -672,8 +675,11 @@ 


#define PORT_HOTPLUG_STAT	0x61114

#define   HDMIB_HOTPLUG_INT_STATUS		(1 << 29)

#define   DPB_HOTPLUG_INT_STATUS		(1 << 29)

#define   HDMIC_HOTPLUG_INT_STATUS		(1 << 28)

#define   DPC_HOTPLUG_INT_STATUS		(1 << 28)

#define   HDMID_HOTPLUG_INT_STATUS		(1 << 27)

#define   DPD_HOTPLUG_INT_STATUS		(1 << 27)

#define   CRT_HOTPLUG_INT_STATUS		(1 << 11)

#define   TV_HOTPLUG_INT_STATUS			(1 << 10)

#define   CRT_HOTPLUG_MONITOR_MASK		(3 << 8)
@@ -1335,6 +1341,163 @@ 
#define TV_V_CHROMA_0		0x68400

#define TV_V_CHROMA_42		0x684a8



/* Display Port */

#define DP_B				0x64100

#define DP_C				0x64200

#define DP_D				0x64300



#define   DP_PORT_EN			(1 << 31)

#define   DP_PIPEB_SELECT		(1 << 30)



/* Link training mode - select a suitable mode for each stage */

#define   DP_LINK_TRAIN_PAT_1		(0 << 28)

#define   DP_LINK_TRAIN_PAT_2		(1 << 28)

#define   DP_LINK_TRAIN_PAT_IDLE	(2 << 28)

#define   DP_LINK_TRAIN_OFF		(3 << 28)

#define   DP_LINK_TRAIN_MASK		(3 << 28)

#define   DP_LINK_TRAIN_SHIFT		28



/* Signal voltages. These are mostly controlled by the other end */

#define   DP_VOLTAGE_0_4		(0 << 25)

#define   DP_VOLTAGE_0_6		(1 << 25)

#define   DP_VOLTAGE_0_8		(2 << 25)

#define   DP_VOLTAGE_1_2		(3 << 25)

#define   DP_VOLTAGE_MASK		(7 << 25)

#define   DP_VOLTAGE_SHIFT		25



/* Signal pre-emphasis levels, like voltages, the other end tells us what

 * they want

 */

#define   DP_PRE_EMPHASIS_0		(0 << 22)

#define   DP_PRE_EMPHASIS_3_5		(1 << 22)

#define   DP_PRE_EMPHASIS_6		(2 << 22)

#define   DP_PRE_EMPHASIS_9_5		(3 << 22)

#define   DP_PRE_EMPHASIS_MASK		(7 << 22)

#define   DP_PRE_EMPHASIS_SHIFT		22



/* How many wires to use. I guess 3 was too hard */

#define   DP_PORT_WIDTH_1		(0 << 19)

#define   DP_PORT_WIDTH_2		(1 << 19)

#define   DP_PORT_WIDTH_4		(3 << 19)

#define   DP_PORT_WIDTH_MASK		(7 << 19)



/* Mystic DPCD version 1.1 special mode */

#define   DP_ENHANCED_FRAMING		(1 << 18)



/** locked once port is enabled */

#define   DP_PORT_REVERSAL		(1 << 15)



/** sends the clock on lane 15 of the PEG for debug */

#define   DP_CLOCK_OUTPUT_ENABLE	(1 << 13)



#define   DP_SCRAMBLING_DISABLE		(1 << 12)



/** limit RGB values to avoid confusing TVs */

#define   DP_COLOR_RANGE_16_235		(1 << 8)



/** Turn on the audio link */

#define   DP_AUDIO_OUTPUT_ENABLE	(1 << 6)



/** vs and hs sync polarity */

#define   DP_SYNC_VS_HIGH		(1 << 4)

#define   DP_SYNC_HS_HIGH		(1 << 3)



/** A fantasy */

#define   DP_DETECTED			(1 << 2)



/** The aux channel provides a way to talk to the

 * signal sink for DDC etc. Max packet size supported

 * is 20 bytes in each direction, hence the 5 fixed

 * data registers

 */

#define DPB_AUX_CH_CTL			0x64110

#define DPB_AUX_CH_DATA1		0x64114

#define DPB_AUX_CH_DATA2		0x64118

#define DPB_AUX_CH_DATA3		0x6411c

#define DPB_AUX_CH_DATA4		0x64120

#define DPB_AUX_CH_DATA5		0x64124



#define DPC_AUX_CH_CTL			0x64210

#define DPC_AUX_CH_DATA1		0x64214

#define DPC_AUX_CH_DATA2		0x64218

#define DPC_AUX_CH_DATA3		0x6421c

#define DPC_AUX_CH_DATA4		0x64220

#define DPC_AUX_CH_DATA5		0x64224



#define DPD_AUX_CH_CTL			0x64310

#define DPD_AUX_CH_DATA1		0x64314

#define DPD_AUX_CH_DATA2		0x64318

#define DPD_AUX_CH_DATA3		0x6431c

#define DPD_AUX_CH_DATA4		0x64320

#define DPD_AUX_CH_DATA5		0x64324



#define   DP_AUX_CH_CTL_SEND_BUSY	    (1 << 31)

#define   DP_AUX_CH_CTL_DONE		    (1 << 30)

#define   DP_AUX_CH_CTL_INTERRUPT	    (1 << 29)

#define   DP_AUX_CH_CTL_TIME_OUT_ERROR	    (1 << 28)

#define   DP_AUX_CH_CTL_TIME_OUT_400us	    (0 << 26)

#define   DP_AUX_CH_CTL_TIME_OUT_600us	    (1 << 26)

#define   DP_AUX_CH_CTL_TIME_OUT_800us	    (2 << 26)

#define   DP_AUX_CH_CTL_TIME_OUT_1600us	    (3 << 26)

#define   DP_AUX_CH_CTL_TIME_OUT_MASK	    (3 << 26)

#define   DP_AUX_CH_CTL_RECEIVE_ERROR	    (1 << 25)

#define   DP_AUX_CH_CTL_MESSAGE_SIZE_MASK    (0x1f << 20)

#define   DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT   20

#define   DP_AUX_CH_CTL_PRECHARGE_2US_MASK   (0xf << 16)

#define   DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT  16

#define   DP_AUX_CH_CTL_AUX_AKSV_SELECT	    (1 << 15)

#define   DP_AUX_CH_CTL_MANCHESTER_TEST	    (1 << 14)

#define   DP_AUX_CH_CTL_SYNC_TEST	    (1 << 13)

#define   DP_AUX_CH_CTL_DEGLITCH_TEST	    (1 << 12)

#define   DP_AUX_CH_CTL_PRECHARGE_TEST	    (1 << 11)

#define   DP_AUX_CH_CTL_BIT_CLOCK_2X_MASK    (0x7ff)

#define   DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT   0



/*

 * Computing GMCH M and N values for the Display Port link

 *

 * GMCH M/N = dot clock * bytes per pixel / ls_clk * # of lanes

 *

 * ls_clk (we assume) is the DP link clock (1.62 or 2.7 GHz)

 *

 * The GMCH value is used internally

 *

 * bytes_per_pixel is the number of bytes coming out of the plane,

 * which is after the LUTs, so we want the bytes for our color format.

 * For our current usage, this is always 3, one byte for R, G and B.

 */

#define PIPEA_GMCH_DATA_M			0x70050

#define PIPEB_GMCH_DATA_M			0x71050



/* Transfer unit size for display port - 1, default is 0x3f (for TU size 64) */

#define   PIPE_GMCH_DATA_M_TU_SIZE_MASK		(0x3f << 25)

#define   PIPE_GMCH_DATA_M_TU_SIZE_SHIFT	25



#define   PIPE_GMCH_DATA_M_MASK			(0xffffff)



#define PIPEA_GMCH_DATA_N			0x70054

#define PIPEB_GMCH_DATA_N			0x71054

#define   PIPE_GMCH_DATA_N_MASK			(0xffffff)



/*

 * Computing Link M and N values for the Display Port link

 *

 * Link M / N = pixel_clock / ls_clk

 *

 * (the DP spec calls pixel_clock the 'strm_clk')

 *

 * The Link value is transmitted in the Main Stream

 * Attributes and VB-ID.

 */



#define PIPEA_DP_LINK_M				0x70060

#define PIPEB_DP_LINK_M				0x71060

#define   PIPEA_DP_LINK_M_MASK			(0xffffff)



#define PIPEA_DP_LINK_N				0x70064

#define PIPEB_DP_LINK_N				0x71064

#define   PIPEA_DP_LINK_N_MASK			(0xffffff)



/* Display & cursor control */



/* Pipe A */

CRA Git | Maintained and supported by SUSTech CRA and CCSE