ARM: dts: sun5i: Add new Auxtek-t004 board

	sun4i-a10-olinuxino-lime.dtb \

	sun4i-a10-pcduino.dtb

dtb-$(CONFIG_MACH_SUN5I) += \

	sun5i-a10s-auxtek-t004.dtb \

	sun5i-a10s-mk802.dtb \

	sun5i-a10s-olinuxino-micro.dtb \

	sun5i-a10s-r7-tv-dongle.dtb \

/*

 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 *     You should have received a copy of the GNU General Public

 *     License along with this file; if not, write to the Free

 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,

 *     MA 02110-1301 USA

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */

/dts-v1/;

#include "sun5i-a10s.dtsi"

#include "sunxi-common-regulators.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/pinctrl/sun4i-a10.h>

/ {

	model = "Auxtek t004 A10s hdmi tv-stick";

	compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s";

	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&led_pins_t004>;

		red {

			label = "t004-tv-dongle:red:usr";

			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */

			default-state = "on";

		};

	};

	reg_vmmc1: vmmc1 {

		compatible = "regulator-fixed";

		pinctrl-names = "default";

		pinctrl-0 = <&mmc1_vcc_en_pin_t004>;

		regulator-name = "vmmc1";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		enable-active-high;

		gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */

	};

};

&ehci0 {

	status = "okay";

};

&mmc0 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <4>;

	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */

	cd-inverted;

	status = "okay";

};

&mmc1 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc1_pins_a>;

	vmmc-supply = <&reg_vmmc1>;

	bus-width = <4>;

	non-removable;

	cap-sdio-irq;

	status = "okay";

};

&ohci0 {

	status = "okay";

};

&pio {

	mmc0_cd_pin_t004: mmc0_cd_pin@0 {

		allwinner,pins = "PG1";

		allwinner,function = "gpio_in";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

	};

	mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 {

		allwinner,pins = "PB18";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};

	led_pins_t004: led_pins@0 {

		allwinner,pins = "PB2";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_20_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};

};

&reg_usb1_vbus {

	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */

	status = "okay";

};

&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_pins_a>;

	status = "okay";

};

&usb1_vbus_pin_a {

	allwinner,pins = "PG13";

};

&usbphy {

	usb1_vbus-supply = <&reg_usb1_vbus>;

	status = "okay";

};