powerpc/85xx: Add P2020DS board support (01af9507) · Commits · 戴 / test

arch/powerpc/boot/dts/p2020ds.dts

0 → 100644

+704 −0

Original line number	Diff line number	Diff line
		/*
		* P2020 DS Device Tree Source
		*
		* Copyright 2009 Freescale Semiconductor Inc.
		*
		* This program is free software; you can redistribute it and/or modify it
		* under the terms of the GNU General Public License as published by the
		* Free Software Foundation; either version 2 of the License, or (at your
		* option) any later version.
		*/

		/dts-v1/;
		/ {
		model = "fsl,P2020";
		compatible = "fsl,P2020DS";
		#address-cells = <2>;
		#size-cells = <2>;

		aliases {
		ethernet0 = &enet0;
		ethernet1 = &enet1;
		ethernet2 = &enet2;
		serial0 = &serial0;
		serial1 = &serial1;
		pci0 = &pci0;
		pci1 = &pci1;
		pci2 = &pci2;
		};

		cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,P2020@0 {
		device_type = "cpu";
		reg = <0x0>;
		next-level-cache = <&L2>;
		};

		PowerPC,P2020@1 {
		device_type = "cpu";
		reg = <0x1>;
		next-level-cache = <&L2>;
		};
		};

		memory {
		device_type = "memory";
		};

		localbus@ffe05000 {
		#address-cells = <2>;
		#size-cells = <1>;
		compatible = "fsl,elbc", "simple-bus";
		reg = <0 0xffe05000 0 0x1000>;
		interrupts = <19 2>;
		interrupt-parent = <&mpic>;

		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
		0x1 0x0 0x0 0xe0000000 0x08000000
		0x2 0x0 0x0 0xffa00000 0x00040000
		0x3 0x0 0x0 0xffdf0000 0x00008000
		0x4 0x0 0x0 0xffa40000 0x00040000
		0x5 0x0 0x0 0xffa80000 0x00040000
		0x6 0x0 0x0 0xffac0000 0x00040000>;

		nor@0,0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "cfi-flash";
		reg = <0x0 0x0 0x8000000>;
		bank-width = <2>;
		device-width = <1>;

		ramdisk@0 {
		reg = <0x0 0x03000000>;
		read-only;
		};

		diagnostic@3000000 {
		reg = <0x03000000 0x00e00000>;
		read-only;
		};

		dink@3e00000 {
		reg = <0x03e00000 0x00200000>;
		read-only;
		};

		kernel@4000000 {
		reg = <0x04000000 0x00400000>;
		read-only;
		};

		jffs2@4400000 {
		reg = <0x04400000 0x03b00000>;
		};

		dtb@7f00000 {
		reg = <0x07f00000 0x00080000>;
		read-only;
		};

		u-boot@7f80000 {
		reg = <0x07f80000 0x00080000>;
		read-only;
		};
		};

		nand@2,0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,elbc-fcm-nand";
		reg = <0x2 0x0 0x40000>;

		u-boot@0 {
		reg = <0x0 0x02000000>;
		read-only;
		};

		jffs2@2000000 {
		reg = <0x02000000 0x10000000>;
		};

		ramdisk@12000000 {
		reg = <0x12000000 0x08000000>;
		read-only;
		};

		kernel@1a000000 {
		reg = <0x1a000000 0x04000000>;
		};

		dtb@1e000000 {
		reg = <0x1e000000 0x01000000>;
		read-only;
		};

		empty@1f000000 {
		reg = <0x1f000000 0x21000000>;
		};
		};

		nand@4,0 {
		compatible = "fsl,elbc-fcm-nand";
		reg = <0x4 0x0 0x40000>;
		};

		nand@5,0 {
		compatible = "fsl,elbc-fcm-nand";
		reg = <0x5 0x0 0x40000>;
		};

		nand@6,0 {
		compatible = "fsl,elbc-fcm-nand";
		reg = <0x6 0x0 0x40000>;
		};
		};

		soc@ffe00000 {
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		compatible = "fsl,p2020-immr", "simple-bus";
		ranges = <0x0 0 0xffe00000 0x100000>;
		bus-frequency = <0>; // Filled out by uboot.

		ecm-law@0 {
		compatible = "fsl,ecm-law";
		reg = <0x0 0x1000>;
		fsl,num-laws = <12>;
		};

		ecm@1000 {
		compatible = "fsl,p2020-ecm", "fsl,ecm";
		reg = <0x1000 0x1000>;
		interrupts = <17 2>;
		interrupt-parent = <&mpic>;
		};

		memory-controller@2000 {
		compatible = "fsl,p2020-memory-controller";
		reg = <0x2000 0x1000>;
		interrupt-parent = <&mpic>;
		interrupts = <18 2>;
		};

		i2c@3000 {
		#address-cells = <1>;
		#size-cells = <0>;
		cell-index = <0>;
		compatible = "fsl-i2c";
		reg = <0x3000 0x100>;
		interrupts = <43 2>;
		interrupt-parent = <&mpic>;
		dfsrr;
		};

		i2c@3100 {
		#address-cells = <1>;
		#size-cells = <0>;
		cell-index = <1>;
		compatible = "fsl-i2c";
		reg = <0x3100 0x100>;
		interrupts = <43 2>;
		interrupt-parent = <&mpic>;
		dfsrr;
		};

		serial0: serial@4500 {
		cell-index = <0>;
		device_type = "serial";
		compatible = "ns16550";
		reg = <0x4500 0x100>;
		clock-frequency = <0>;
		interrupts = <42 2>;
		interrupt-parent = <&mpic>;
		};

		serial1: serial@4600 {
		cell-index = <1>;
		device_type = "serial";
		compatible = "ns16550";
		reg = <0x4600 0x100>;
		clock-frequency = <0>;
		interrupts = <42 2>;
		interrupt-parent = <&mpic>;
		};

		spi@7000 {
		compatible = "fsl,espi";
		reg = <0x7000 0x1000>;
		interrupts = <59 0x2>;
		interrupt-parent = <&mpic>;
		};

		dma@c300 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,eloplus-dma";
		reg = <0xc300 0x4>;
		ranges = <0x0 0xc100 0x200>;
		cell-index = <1>;
		dma-channel@0 {
		compatible = "fsl,eloplus-dma-channel";
		reg = <0x0 0x80>;
		cell-index = <0>;
		interrupt-parent = <&mpic>;
		interrupts = <76 2>;
		};
		dma-channel@80 {
		compatible = "fsl,eloplus-dma-channel";
		reg = <0x80 0x80>;
		cell-index = <1>;
		interrupt-parent = <&mpic>;
		interrupts = <77 2>;
		};
		dma-channel@100 {
		compatible = "fsl,eloplus-dma-channel";
		reg = <0x100 0x80>;
		cell-index = <2>;
		interrupt-parent = <&mpic>;
		interrupts = <78 2>;
		};
		dma-channel@180 {
		compatible = "fsl,eloplus-dma-channel";
		reg = <0x180 0x80>;
		cell-index = <3>;
		interrupt-parent = <&mpic>;
		interrupts = <79 2>;
		};
		};

		gpio: gpio-controller@f000 {
		#gpio-cells = <2>;
		compatible = "fsl,mpc8572-gpio";
		reg = <0xf000 0x100>;
		interrupts = <47 0x2>;
		interrupt-parent = <&mpic>;
		gpio-controller;
		};

		L2: l2-cache-controller@20000 {
		compatible = "fsl,p2020-l2-cache-controller";
		reg = <0x20000 0x1000>;
		cache-line-size = <32>; // 32 bytes
		cache-size = <0x80000>; // L2, 512k
		interrupt-parent = <&mpic>;
		interrupts = <16 2>;
		};

		dma@21300 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,eloplus-dma";
		reg = <0x21300 0x4>;
		ranges = <0x0 0x21100 0x200>;
		cell-index = <0>;
		dma-channel@0 {
		compatible = "fsl,eloplus-dma-channel";
		reg = <0x0 0x80>;
		cell-index = <0>;
		interrupt-parent = <&mpic>;
		interrupts = <20 2>;
		};
		dma-channel@80 {
		compatible = "fsl,eloplus-dma-channel";
		reg = <0x80 0x80>;
		cell-index = <1>;
		interrupt-parent = <&mpic>;
		interrupts = <21 2>;
		};
		dma-channel@100 {
		compatible = "fsl,eloplus-dma-channel";
		reg = <0x100 0x80>;
		cell-index = <2>;
		interrupt-parent = <&mpic>;
		interrupts = <22 2>;
		};
		dma-channel@180 {
		compatible = "fsl,eloplus-dma-channel";
		reg = <0x180 0x80>;
		cell-index = <3>;
		interrupt-parent = <&mpic>;
		interrupts = <23 2>;
		};
		};

		usb@22000 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "fsl-usb2-dr";
		reg = <0x22000 0x1000>;
		interrupt-parent = <&mpic>;
		interrupts = <28 0x2>;
		phy_type = "ulpi";
		};

		enet0: ethernet@24000 {
		#address-cells = <1>;
		#size-cells = <1>;
		cell-index = <0>;
		device_type = "network";
		model = "eTSEC";
		compatible = "gianfar";
		reg = <0x24000 0x1000>;
		ranges = <0x0 0x24000 0x1000>;
		local-mac-address = [ 00 00 00 00 00 00 ];
		interrupts = <29 2 30 2 34 2>;
		interrupt-parent = <&mpic>;
		tbi-handle = <&tbi0>;
		phy-handle = <&phy0>;
		phy-connection-type = "rgmii-id";

		mdio@520 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "fsl,gianfar-mdio";
		reg = <0x520 0x20>;

		phy0: ethernet-phy@0 {
		interrupt-parent = <&mpic>;
		interrupts = <3 1>;
		reg = <0x0>;
		};
		phy1: ethernet-phy@1 {
		interrupt-parent = <&mpic>;
		interrupts = <3 1>;
		reg = <0x1>;
		};
		phy2: ethernet-phy@2 {
		interrupt-parent = <&mpic>;
		interrupts = <3 1>;
		reg = <0x2>;
		};
		tbi0: tbi-phy@11 {
		reg = <0x11>;
		device_type = "tbi-phy";
		};
		};
		};

		enet1: ethernet@25000 {
		#address-cells = <1>;
		#size-cells = <1>;
		cell-index = <1>;
		device_type = "network";
		model = "eTSEC";
		compatible = "gianfar";
		reg = <0x25000 0x1000>;
		ranges = <0x0 0x25000 0x1000>;
		local-mac-address = [ 00 00 00 00 00 00 ];
		interrupts = <35 2 36 2 40 2>;
		interrupt-parent = <&mpic>;
		tbi-handle = <&tbi1>;
		phy-handle = <&phy1>;
		phy-connection-type = "rgmii-id";

		mdio@520 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "fsl,gianfar-tbi";
		reg = <0x520 0x20>;

		tbi1: tbi-phy@11 {
		reg = <0x11>;
		device_type = "tbi-phy";
		};
		};
		};

		enet2: ethernet@26000 {
		#address-cells = <1>;
		#size-cells = <1>;
		cell-index = <2>;
		device_type = "network";
		model = "eTSEC";
		compatible = "gianfar";
		reg = <0x26000 0x1000>;
		ranges = <0x0 0x26000 0x1000>;
		local-mac-address = [ 00 00 00 00 00 00 ];
		interrupts = <31 2 32 2 33 2>;
		interrupt-parent = <&mpic>;
		tbi-handle = <&tbi2>;
		phy-handle = <&phy2>;
		phy-connection-type = "rgmii-id";

		mdio@520 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "fsl,gianfar-tbi";
		reg = <0x520 0x20>;

		tbi2: tbi-phy@11 {
		reg = <0x11>;
		device_type = "tbi-phy";
		};
		};
		};

		sdhci@2e000 {
		compatible = "fsl,p2020-esdhc", "fsl,esdhc";
		reg = <0x2e000 0x1000>;
		interrupts = <72 0x2>;
		interrupt-parent = <&mpic>;
		/* Filled in by U-Boot */
		clock-frequency = <0>;
		};

		crypto@30000 {
		compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
		"fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
		reg = <0x30000 0x10000>;
		interrupts = <45 2 58 2>;
		interrupt-parent = <&mpic>;
		fsl,num-channels = <4>;
		fsl,channel-fifo-len = <24>;
		fsl,exec-units-mask = <0xbfe>;
		fsl,descriptor-types-mask = <0x3ab0ebf>;
		};

		mpic: pic@40000 {
		interrupt-controller;
		#address-cells = <0>;
		#interrupt-cells = <2>;
		reg = <0x40000 0x40000>;
		compatible = "chrp,open-pic";
		device_type = "open-pic";
		};

		msi@41600 {
		compatible = "fsl,mpic-msi";
		reg = <0x41600 0x80>;
		msi-available-ranges = <0 0x100>;
		interrupts = <
		0xe0 0
		0xe1 0
		0xe2 0
		0xe3 0
		0xe4 0
		0xe5 0
		0xe6 0
		0xe7 0>;
		interrupt-parent = <&mpic>;
		};

		global-utilities@e0000 { //global utilities block
		compatible = "fsl,p2020-guts";
		reg = <0xe0000 0x1000>;
		fsl,has-rstcr;
		};
		};

		pci0: pcie@ffe08000 {
		compatible = "fsl,mpc8548-pcie";
		device_type = "pci";
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0 0xffe08000 0 0x1000>;
		bus-range = <0 255>;
		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
		0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
		clock-frequency = <33333333>;
		interrupt-parent = <&mpic>;
		interrupts = <24 2>;
		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
		interrupt-map = <
		/* IDSEL 0x0 */
		0000 0x0 0x0 0x1 &mpic 0x8 0x1
		0000 0x0 0x0 0x2 &mpic 0x9 0x1
		0000 0x0 0x0 0x3 &mpic 0xa 0x1
		0000 0x0 0x0 0x4 &mpic 0xb 0x1
		>;
		pcie@0 {
		reg = <0x0 0x0 0x0 0x0 0x0>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		ranges = <0x2000000 0x0 0x80000000
		0x2000000 0x0 0x80000000
		0x0 0x20000000

		0x1000000 0x0 0x0
		0x1000000 0x0 0x0
		0x0 0x10000>;
		};
		};

		pci1: pcie@ffe09000 {
		compatible = "fsl,mpc8548-pcie";
		device_type = "pci";
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0 0xffe09000 0 0x1000>;
		bus-range = <0 255>;
		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
		0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
		clock-frequency = <33333333>;
		interrupt-parent = <&mpic>;
		interrupts = <25 2>;
		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
		interrupt-map = <

		// IDSEL 0x11 func 0 - PCI slot 1
		0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
		0x8800 0x0 0x0 0x2 &i8259 0xa 0x2

		// IDSEL 0x11 func 1 - PCI slot 1
		0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
		0x8900 0x0 0x0 0x2 &i8259 0xa 0x2

		// IDSEL 0x11 func 2 - PCI slot 1
		0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
		0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2

		// IDSEL 0x11 func 3 - PCI slot 1
		0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
		0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2

		// IDSEL 0x11 func 4 - PCI slot 1
		0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
		0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2

		// IDSEL 0x11 func 5 - PCI slot 1
		0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
		0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2

		// IDSEL 0x11 func 6 - PCI slot 1
		0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
		0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2

		// IDSEL 0x11 func 7 - PCI slot 1
		0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
		0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2

		// IDSEL 0x1d Audio
		0xe800 0x0 0x0 0x1 &i8259 0x6 0x2

		// IDSEL 0x1e Legacy
		0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
		0xf100 0x0 0x0 0x1 &i8259 0x7 0x2

		// IDSEL 0x1f IDE/SATA
		0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
		0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
		>;

		pcie@0 {
		reg = <0x0 0x0 0x0 0x0 0x0>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		ranges = <0x2000000 0x0 0xa0000000
		0x2000000 0x0 0xa0000000
		0x0 0x20000000

		0x1000000 0x0 0x0
		0x1000000 0x0 0x0
		0x0 0x10000>;
		uli1575@0 {
		reg = <0x0 0x0 0x0 0x0 0x0>;
		#size-cells = <2>;
		#address-cells = <3>;
		ranges = <0x2000000 0x0 0xa0000000
		0x2000000 0x0 0xa0000000
		0x0 0x20000000

		0x1000000 0x0 0x0
		0x1000000 0x0 0x0
		0x0 0x10000>;
		isa@1e {
		device_type = "isa";
		#interrupt-cells = <2>;
		#size-cells = <1>;
		#address-cells = <2>;
		reg = <0xf000 0x0 0x0 0x0 0x0>;
		ranges = <0x1 0x0 0x1000000 0x0 0x0
		0x1000>;
		interrupt-parent = <&i8259>;

		i8259: interrupt-controller@20 {
		reg = <0x1 0x20 0x2
		0x1 0xa0 0x2
		0x1 0x4d0 0x2>;
		interrupt-controller;
		device_type = "interrupt-controller";
		#address-cells = <0>;
		#interrupt-cells = <2>;
		compatible = "chrp,iic";
		interrupts = <4 1>;
		interrupt-parent = <&mpic>;
		};

		i8042@60 {
		#size-cells = <0>;
		#address-cells = <1>;
		reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
		interrupts = <1 3 12 3>;
		interrupt-parent =
		<&i8259>;

		keyboard@0 {
		reg = <0x0>;
		compatible = "pnpPNP,303";
		};

		mouse@1 {
		reg = <0x1>;
		compatible = "pnpPNP,f03";
		};
		};

		rtc@70 {
		compatible = "pnpPNP,b00";
		reg = <0x1 0x70 0x2>;
		};

		gpio@400 {
		reg = <0x1 0x400 0x80>;
		};
		};
		};
		};

		};

		pci2: pcie@ffe0a000 {
		compatible = "fsl,mpc8548-pcie";
		device_type = "pci";
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0 0xffe0a000 0 0x1000>;
		bus-range = <0 255>;
		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
		0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
		clock-frequency = <33333333>;
		interrupt-parent = <&mpic>;
		interrupts = <26 2>;
		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
		interrupt-map = <
		/* IDSEL 0x0 */
		0000 0x0 0x0 0x1 &mpic 0x0 0x1
		0000 0x0 0x0 0x2 &mpic 0x1 0x1
		0000 0x0 0x0 0x3 &mpic 0x2 0x1
		0000 0x0 0x0 0x4 &mpic 0x3 0x1
		>;
		pcie@0 {
		reg = <0x0 0x0 0x0 0x0 0x0>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		ranges = <0x2000000 0x0 0xc0000000
		0x2000000 0x0 0xc0000000
		0x0 0x20000000

		0x1000000 0x0 0x0
		0x1000000 0x0 0x0
		0x0 0x10000>;
		};
		};
		};

arch/powerpc/platforms/85xx/mpc85xx_ds.c

+38 −5

Original line number	Diff line number	Diff line
		@@ -163,7 +163,8 @@ static void __init mpc85xx_ds_setup_arch(void)
		#ifdef CONFIG_PCI
		for_each_node_by_type(np, "pci") {
		if (of_device_is_compatible(np, "fsl,mpc8540-pci") \|\|
		of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
		of_device_is_compatible(np, "fsl,mpc8548-pcie") \|\|
		of_device_is_compatible(np, "fsl,p2020-pcie")) {
		struct resource rsrc;
		of_address_to_resource(np, 0, &rsrc);
		if ((rsrc.start & 0xfffff) == primary_phb_addr)
		@@ -195,9 +196,9 @@ static int __init mpc8544_ds_probe(void)
		primary_phb_addr = 0xb000;
		#endif
		return 1;
		} else {
		return 0;
		}

		return 0;
		}

		static struct of_device_id __initdata mpc85xxds_ids[] = {
		@@ -214,6 +215,7 @@ static int __init mpc85xxds_publish_devices(void)
		}
		machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices);
		machine_device_initcall(mpc8572_ds, mpc85xxds_publish_devices);
		machine_device_initcall(p2020_ds, mpc85xxds_publish_devices);

		/*
		* Called very early, device-tree isn't unflattened
		@@ -227,9 +229,26 @@ static int __init mpc8572_ds_probe(void)
		primary_phb_addr = 0x8000;
		#endif
		return 1;
		} else {
		}

		return 0;
		}

		/*
		* Called very early, device-tree isn't unflattened
		*/
		static int __init p2020_ds_probe(void)
		{
		unsigned long root = of_get_flat_dt_root();

		if (of_flat_dt_is_compatible(root, "fsl,P2020DS")) {
		#ifdef CONFIG_PCI
		primary_phb_addr = 0x9000;
		#endif
		return 1;
		}

		return 0;
		}

		define_machine(mpc8544_ds) {
		@@ -259,3 +278,17 @@ define_machine(mpc8572_ds) {
		.calibrate_decr = generic_calibrate_decr,
		.progress = udbg_progress,
		};

		define_machine(p2020_ds) {
		.name = "P2020 DS",
		.probe = p2020_ds_probe,
		.setup_arch = mpc85xx_ds_setup_arch,
		.init_IRQ = mpc85xx_ds_pic_init,
		#ifdef CONFIG_PCI
		.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
		#endif
		.get_irq = mpic_get_irq,
		.restart = fsl_rstcr_restart,
		.calibrate_decr = generic_calibrate_decr,
		.progress = udbg_progress,
		};

arch/powerpc/platforms/fsl_uli1575.c

+1 −0

Original line number	Diff line number	Diff line
		@@ -55,6 +55,7 @@ static inline bool is_quirk_valid(void)
		{
		return (machine_is(mpc86xx_hpcn) \|\|
		machine_is(mpc8544_ds) \|\|
		machine_is(p2020_ds) \|\|
		machine_is(mpc8572_ds));
		}

arch/powerpc/sysdev/fsl_pci.c

+2 −0

Original line number	Diff line number	Diff line
		@@ -302,6 +302,8 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536, quirk_fsl_pcie_header);
		DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
		DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
		DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
		DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020E, quirk_fsl_pcie_header);
		DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020, quirk_fsl_pcie_header);
		#endif /* CONFIG_PPC_85xx \|\| CONFIG_PPC_86xx */

		#if defined(CONFIG_PPC_83xx) \|\| defined(CONFIG_PPC_MPC512x)

include/linux/pci_ids.h

+2 −0

Original line number	Diff line number	Diff line
		@@ -2288,6 +2288,8 @@
		#define PCI_DEVICE_ID_MPC8572 0x0041
		#define PCI_DEVICE_ID_MPC8536E 0x0050
		#define PCI_DEVICE_ID_MPC8536 0x0051
		#define PCI_DEVICE_ID_P2020E 0x0070
		#define PCI_DEVICE_ID_P2020 0x0071
		#define PCI_DEVICE_ID_MPC8641 0x7010
		#define PCI_DEVICE_ID_MPC8641D 0x7011
		#define PCI_DEVICE_ID_MPC8610 0x7018

Admin message