+54
−11
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
Enable all three capture channels, including the missing nid 7 which is the only one capable of capturing DMIC input Enable Headphone amp for the HP jack. This causes a volume boost for headphones, but does not cause any noticeable effect for light loads like other amps, so there is no need to make it configurable. Add Input Mix capture mux setting to capture the output of the playback input mux (that is, what goes out the speakers except for PCM) Hack another coef register because the stereo DMIC for some reason produces a nonstandard sum/difference signal. I found a bit to make it just use the sum signal for both channels, which makes it behave like a standard mono microphone. The stereo is useless anyway (they're 1cm apart). Tested working: Three capture channels, mic in, line in, DMIC. Tested not working: CD. Not sure why, might be unconnected in the actual hardware or a CD drive issue. Also looked at SPDIF. It appears to work (emitter lights up inside the HP out jack) but I lack a proper miniTOSLINK cable to test it. Signed-off-by:Hector Martin <hector@marcansoft.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
CRA Git | Maintained and supported by SUSTech CRA and CCSE