Commit fda588bf authored by The.Thanh Nguyen's avatar The.Thanh Nguyen Committed by Benjamin Cabé
Browse files

boards: shields: rtkmipilcdb00000be: update shield doc 

Correct doc formatting
Remove platform specific hardware configuration

Signed-off-by: default avatarThe.Thanh Nguyen <the.nguyen.yf@outlook.com>
parent 82439bb1

boards/shields/rtkmipilcdb00000be/doc/index.rst

+7 −20
Changes for boards/shields/rtkmipilcdb00000be/doc/index.rst: 7 added lines, 20 removed lines.
Original line number Diff line number Diff line
@@ -14,19 +14,19 @@ This display uses a 26 pin connector header. 
Pins Assignment of the Renesas RTKMIPILCDB00000BE MIPI Display

==============================================================



+-----------------------+------------------------+

+----------------------+-------------------------+

| Connector Pin        | Function                |

+=======================+========================+

+======================+=========================+

| 14                   | Touch ctrl I2C SDA      |

+-----------------------+------------------------+

+----------------------+-------------------------+

| 15                   | Display backlight enable|

+-----------------------+------------------------+

+----------------------+-------------------------+

| 16                   | Touch ctrl I2C SCL      |

+-----------------------+------------------------+

+----------------------+-------------------------+

| 17                   | External interrupt      |

+-----------------------+------------------------+

+----------------------+-------------------------+

| 18                   | Display reset           |

+-----------------------+------------------------+

+----------------------+-------------------------+



Hardware Requirements:

**********************
@@ -35,19 +35,6 @@ Supported Renesas RA boards: EK-RA8D1 
- 1 x RA Board

- 1 x Micro USB cable



Hardware Configuration:

***********************



The MIPI Graphics Expansion Port (J58) connects the EK-RA8D1 board to the MIPI Graphics Expansion Board

supplied as part of the kit.



Set the configuration switches (SW1) as below to avoid potential failures.

		+-------------+-------------+--------------+------------+------------+------------+-------------+-----------+

		| SW1-1 PMOD1 | SW1-2 TRACE | SW1-3 CAMERA | SW1-4 ETHA | SW1-5 ETHB | SW1-6 GLCD | SW1-7 SDRAM | SW1-8 I3C |

		+-------------+-------------+--------------+------------+------------+------------+-------------+-----------+

		|     OFF     |     OFF     |      OFF     |     OFF    |     OFF    |     ON     |     ON      |    OFF    |

		+-------------+-------------+--------------+------------+------------+------------+-------------+-----------+



Programming

***********

CRA Git | Maintained and supported by SUSTech CRA and CCSE