Commit db6ca323 authored by Mahesh Mahadevan's avatar Mahesh Mahadevan Committed by Anas Nashif
Browse files

boards: rw612: Add code to configure the pins in PM Mode 3 



These settings are used to put the pins in power saving mode
when we enter SUSPEND power mode.

Signed-off-by: default avatarMahesh Mahadevan <mahesh.mahadevan@nxp.com>
parent bfd5fab2

boards/nxp/frdm_rw612/init.c

+31 −0
Original line number Diff line number Diff line
@@ -6,6 +6,17 @@ 
#include <zephyr/pm/pm.h>

#include <fsl_power.h>

#include <fsl_common.h>

#include <fsl_io_mux.h>



#define NON_AON_PINS_START	0

#define NON_AON_PINS_BREAK	21

#define NON_AON_PINS_RESTART	28

#define NON_AON_PINS_END	63

#define RF_CNTL_PINS_START	0

#define RF_CNTL_PINS_END	3

#define LED_BLUE_GPIO		0

#define LED_RED_GPIO		1

#define LED_GREEN_GPIO		12



static void frdm_rw612_power_init_config(void)

{
@@ -42,6 +53,26 @@ void board_early_init_hook(void) 
	};



	pm_notifier_register(&frdm_rw612_pm_notifier);



	int32_t i;



	/* Set all non-AON pins output low level in sleep mode. */

	for (i = NON_AON_PINS_START; i <= NON_AON_PINS_BREAK; i++) {

		IO_MUX_SetPinOutLevelInSleep(i, IO_MUX_SleepPinLevelLow);

	}

	for (i = NON_AON_PINS_RESTART; i <= NON_AON_PINS_END; i++) {

		IO_MUX_SetPinOutLevelInSleep(i, IO_MUX_SleepPinLevelLow);

	}



	/* Set the LED GPIO output pins to be High in PM3 as these pins are Active Low */

	IO_MUX_SetPinOutLevelInSleep(LED_BLUE_GPIO, IO_MUX_SleepPinLevelHigh);

	IO_MUX_SetPinOutLevelInSleep(LED_RED_GPIO, IO_MUX_SleepPinLevelHigh);

	IO_MUX_SetPinOutLevelInSleep(LED_GREEN_GPIO, IO_MUX_SleepPinLevelHigh);



	/* Set RF_CNTL 0-3 output low level in sleep mode. */

	for (i = RF_CNTL_PINS_START; i <= RF_CNTL_PINS_END; i++) {

		IO_MUX_SetRfPinOutLevelInSleep(i, IO_MUX_SleepPinLevelLow);

	}

#endif



#ifdef CONFIG_I2S_TEST_SEPARATE_DEVICES

boards/nxp/rd_rw612_bga/init.c

+23 −0
Original line number Diff line number Diff line
@@ -6,6 +6,14 @@ 
#include <zephyr/pm/pm.h>

#include <fsl_power.h>

#include <fsl_common.h>

#include <fsl_io_mux.h>



#define NON_AON_PINS_START      0

#define NON_AON_PINS_BREAK      21

#define NON_AON_PINS_RESTART    28

#define NON_AON_PINS_END        63

#define RF_CNTL_PINS_START      0

#define RF_CNTL_PINS_END        3



static void rdrw61x_power_init_config(void)

{
@@ -42,6 +50,21 @@ void board_early_init_hook(void) 
	};



	pm_notifier_register(&rdrw61x_pm_notifier);



	int32_t i;



	/* Set all non-AON pins output low level in sleep mode. */

	for (i = NON_AON_PINS_START; i <= NON_AON_PINS_BREAK; i++) {

		IO_MUX_SetPinOutLevelInSleep(i, IO_MUX_SleepPinLevelLow);

	}

	for (i = NON_AON_PINS_RESTART; i <= NON_AON_PINS_END; i++) {

		IO_MUX_SetPinOutLevelInSleep(i, IO_MUX_SleepPinLevelLow);

	}



	/* Set RF_CNTL 0-3 output low level in sleep mode. */

	for (i = RF_CNTL_PINS_START; i <= RF_CNTL_PINS_END; i++) {

		IO_MUX_SetRfPinOutLevelInSleep(i, IO_MUX_SleepPinLevelLow);

	}

#endif



#ifdef CONFIG_I2S_TEST_SEPARATE_DEVICES

CRA Git | Maintained and supported by SUSTech CRA and CCSE