Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码，可以自行至设置中更改；如有其他问题，请发邮件至 service@cra.moe 寻求协助。

Commit ce64b1e5 authored Apr 05, 2025 by Kuba Gryglak Committed by Benjamin Cabé Apr 09, 2025

boards: st: add support for JLink in STM32G4 Nucleo board.cmake files

Add missing support for J-Link in board.cmake configuration
for Nucleo G4 boards so they can be
flashed and debugged using J-Link.

Signed-off-by: Kuba Gryglak <gryglak.kuba@protonmail.com>

parent 99f4a078

boards/st/nucleo_g431kb/board.cmake

+2 −0

Changes for boards/st/nucleo_g431kb/board.cmake: 2 added lines, 0 removed lines.
Original line number	Diff line number	Diff line
		@@ -3,8 +3,10 @@
		# keep first
		board_runner_args(stm32cubeprogrammer "--port=swd" "--reset-mode=hw")
		board_runner_args(pyocd "--target=stm32g431kbtx")
		board_runner_args(jlink "--device=STM32G431KB" "--speed=4000")

		# keep first
		include(${ZEPHYR_BASE}/boards/common/stm32cubeprogrammer.board.cmake)
		include(${ZEPHYR_BASE}/boards/common/pyocd.board.cmake)
		include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)
		include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)

boards/st/nucleo_g431rb/board.cmake

+2 −0

Changes for boards/st/nucleo_g431rb/board.cmake: 2 added lines, 0 removed lines.
Original line number	Diff line number	Diff line
		@@ -3,8 +3,10 @@
		# keep first
		board_runner_args(stm32cubeprogrammer "--port=swd" "--reset-mode=hw")
		board_runner_args(pyocd "--target=stm32g431rbtx")
		board_runner_args(jlink "--device=STM32G431RB" "--speed=4000")

		# keep first
		include(${ZEPHYR_BASE}/boards/common/stm32cubeprogrammer.board.cmake)
		include(${ZEPHYR_BASE}/boards/common/pyocd.board.cmake)
		include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)
		include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)

boards/st/nucleo_g474re/board.cmake

+2 −0

Changes for boards/st/nucleo_g474re/board.cmake: 2 added lines, 0 removed lines.
Original line number	Diff line number	Diff line
		@@ -3,8 +3,10 @@
		# keep first
		board_runner_args(stm32cubeprogrammer "--port=swd" "--reset-mode=hw")
		board_runner_args(pyocd "--target=stm32g474retx")
		board_runner_args(jlink "--device=STM32G474RE" "--speed=4000")

		# keep first
		include(${ZEPHYR_BASE}/boards/common/stm32cubeprogrammer.board.cmake)
		include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)
		include(${ZEPHYR_BASE}/boards/common/pyocd.board.cmake)
		include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)

CRA Git | Maintained and supported by SUSTech CRA and CCSE