Revert "board: Added board support package for Nucleo_F446ZE"

# STM32F446ZE Nucleo board configuration

# Copyright (c) 2021 Tom Owen

# SPDX-License-Identifier: Apache-2.0

config BOARD_NUCLEO_F446ZE

	bool "Nucleo F446ZE Development Board"

	depends on SOC_STM32F446XX

# STM32F446ZE Nucleo board configuration

# Copyright (c) 2021 Tom Owen

# SPDX-License-Identifier: Apache-2.0

if BOARD_NUCLEO_F446ZE

config BOARD

	default "nucleo_f446ze"

config SPI_STM32_INTERRUPT

	default y

	depends on SPI

endif # BOARD_NUCLEO_F446ZE

/*

 * Copyright (c) 2021, Tom Owen

 *

 * SPDX-License-Identifier: Apache-2.0

 */

/ {

	arduino_header: connector {

		compatible = "arduino-header-r3";

		#gpio-cells = <2>;

		gpio-map-mask = <0xffffffff 0xffffffc0>;

		gpio-map-pass-thru = <0 0x3f>;

		gpio-map = <0 0 &gpioa 3 0>,	/* A0 */

			   <1 0 &gpioc 0 0>,	/* A1 */

			   <2 0 &gpioc 3 0>,	/* A2 */

			   <3 0 &gpiof 3 0>,	/* A3 */

			   <4 0 &gpiof 5 0>,	/* A4 */

			   <5 0 &gpiof 10 0>,	/* A5 */

			   <6 0 &gpiog 9 0>,	/* D0 */

			   <7 0 &gpiog 14 0>,	/* D1 */

			   <8 0 &gpiof 15 0>,	/* D2 */

			   <9 0 &gpioe 13 0>,	/* D3 */

			   <10 0 &gpiof 14 0>,	/* D4 */

			   <11 0 &gpioe 11 0>,	/* D5 */

			   <12 0 &gpioe 9 0>,	/* D6 */

			   <13 0 &gpiof 13 0>,	/* D7 */

			   <14 0 &gpiof 12 0>,	/* D8 */

			   <15 0 &gpiod 15 0>,	/* D9 */

			   <16 0 &gpiod 14 0>,	/* D10 */

			   <17 0 &gpioa 7 0>,	/* D11 */

			   <18 0 &gpioa 6 0>,	/* D12 */

			   <19 0 &gpioa 5 0>,	/* D13 */

			   <20 0 &gpiob 9 0>,	/* D14 */

			   <21 0 &gpiob 8 0>;	/* D15 */

	};

};

arduino_i2c: &i2c1 {};

arduino_spi: &spi1 {};

arduino_serial: &usart6 {};

# SPDX-License-Identifier: Apache-2.0

board_runner_args(jlink "--device=STM32F446ZE" "--speed=4000")

include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)

include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)