Commit 701bb2af authored by David B. Kinder's avatar David B. Kinder Committed by Anas Nashif
Browse files

doc: fix misspellings in boards and samples docs 



Fix misspellings found in board and sample docs missed during regular
reviews.

Signed-off-by: default avatarDavid B. Kinder <david.b.kinder@intel.com>
parent 79e91654

boards/arm/arduino_zero/doc/arduino_zero.rst

+1 −1
Original line number Diff line number Diff line
@@ -86,7 +86,7 @@ Programming and Debugging 
*************************



The Arduino Zero comes with a Atmel Embedded Debugger (EDBG).  This

provices a debug interface to the SAMD21 chip and is supported by

provides a debug interface to the SAMD21 chip and is supported by

OpenOCD.



Flashing

boards/posix/native_posix/doc/board.rst

+2 −2
Original line number Diff line number Diff line
@@ -167,7 +167,7 @@ you may add a conditionally compiled (:option:`CONFIG_ARCH_POSIX`) call to 
Debugging

=========



Since the Zephyr executable is a native application, it can be debuged and

Since the Zephyr executable is a native application, it can be debugged and

instrumented as any other native program. The program is compiled with debug

information, so it can be run directly in, for example, ``gdb`` or instrumented

with ``valgrind``.
@@ -334,7 +334,7 @@ depending on interrupt priorities, masking, and locking state. 


Normally the resulting executable runs fully decoupled from the real host time.

That is, simulated time will advance as fast as it can. This is desirable when

running in a debuger or testing in batch, but not if one wants to interact

running in a debugger or testing in batch, but not if one wants to interact

with external interfaces which are based on the real host time.



Peripherals

samples/sensor/amg88xx/README.rst

+2 −2
Original line number Diff line number Diff line
@@ -20,8 +20,8 @@ only in a SMD design. Here are two sources for easily working with this sensor: 
- `AMG88xx Evaluation Kit`_

- `Adafruit AMG8833 8x8 Thermal Camera Sensor`_



We used the Evalutation Kit mounted on FRDM-K64F board.

On the Evalutation Kit, all jumpers except the J11 must be removed.

We used the Evaluation Kit mounted on FRDM-K64F board.

On the Evaluation Kit, all jumpers except the J11 must be removed.



This sample uses the sensor APIs and the provided driver for the AMG88xx sensor.

CRA Git | Maintained and supported by SUSTech CRA and CCSE