drivers: ieee802154: nrf5: add `IEEE802154_RX_ON_WHEN_IDLE` capability (586eca8a) · Commits · Wenxi XU / zephyr

drivers/ieee802154/ieee802154_nrf5.c

+7 −14

Original line number	Diff line number	Diff line
		@@ -236,6 +236,7 @@ static void nrf5_get_capabilities_at_boot(void)
		((caps & NRF_802154_CAPABILITY_DELAYED_TX) ? IEEE802154_HW_TXTIME : 0UL) \|
		((caps & NRF_802154_CAPABILITY_DELAYED_RX) ? IEEE802154_HW_RXTIME : 0UL) \|
		IEEE802154_HW_SLEEP_TO_TX \|
		IEEE802154_RX_ON_WHEN_IDLE \|
		((caps & NRF_802154_CAPABILITY_SECURITY) ? IEEE802154_HW_TX_SEC : 0UL)
		#if defined(CONFIG_IEEE802154_NRF5_MULTIPLE_CCA)
		\| IEEE802154_OPENTHREAD_HW_MULTIPLE_CCA
		@@ -987,6 +988,10 @@ static int nrf5_configure(const struct device *dev,
		break;
		#endif /* CONFIG_IEEE802154_NRF5_MULTIPLE_CCA */

		case IEEE802154_CONFIG_RX_ON_WHEN_IDLE:
		nrf_802154_rx_on_when_idle_set(config->rx_on_when_idle);
		break;

		default:
		return -EINVAL;
		}
		@@ -1064,21 +1069,9 @@ void nrf_802154_receive_failed(nrf_802154_rx_error_t error, uint32_t id)
		const struct device *dev = nrf5_get_device();

		#if defined(CONFIG_IEEE802154_CSL_ENDPOINT)
		if (id == DRX_SLOT_RX) {
		__ASSERT_NO_MSG(nrf5_data.event_handler);
		#if !defined(CONFIG_IEEE802154_CSL_DEBUG)
		/* When CSL debug option is used we intentionally avoid notifying the higher layer
		* about the finalization of a DRX slot, so that the radio stays in receive state
		* for receiving "out of slot" frames.
		* As a side effect, regular failure notifications would be reported with the
		* incorrect ID.
		*/
		nrf5_data.event_handler(dev, IEEE802154_EVENT_RX_OFF, NULL);
		#endif
		if (error == NRF_802154_RX_ERROR_DELAYED_TIMEOUT) {
		if (id == DRX_SLOT_RX && error == NRF_802154_RX_ERROR_DELAYED_TIMEOUT) {
		return;
		}
		}
		#else
		ARG_UNUSED(id);
		#endif

Admin message