Commit 39bb8d52 authored by Vincent Wan's avatar Vincent Wan Committed by Kumar Gala
Browse files

doc: boards: cc3220sf_launchxl: update docs for Zephyr 2.0 



This commit updates the documentation in preparation for the imminent
release of Zephyr 2.0.

Signed-off-by: default avatarVincent Wan <vincent.wan@linaro.org>
parent 12a11201

boards/arm/cc3220sf_launchxl/doc/index.rst

+11 −12
Original line number Diff line number Diff line
@@ -142,11 +142,11 @@ Prerequisites: 


   Download and install the latest `XDS-110 emulation package`_.



   Follow the directions here to update the firmware:

   http://software-dl.ti.com/ccs/esd/documents/xdsdebugprobes/emu_xds110.html#updating-the-xds110-firmware

   Follow these `xds110 firmware update directions

   <http://software-dl.ti.com/ccs/esd/documents/xdsdebugprobes/emu_xds110.html#updating-the-xds110-firmware>`_



   Note that the emulation package install may place the xdsdfu utility

   in <install_dir>/ccs_base/common/uscif/xds110/.

   in ``<install_dir>/ccs_base/common/uscif/xds110/``.



#. Switch Jumper SOP[2..0] (J15) back to [001].
@@ -214,6 +214,12 @@ To see program output from UART0, connect a separate terminal window: 


Then press the reset button (SW1) on the board to run the program.



When using OpenOCD from Zephyr SDK 0.10.3 to flash the device, you may notice

the program hangs when starting the network processor on the device, if the

program uses it. There is a known issue with how that version of OpenOCD

resets the network processor. You would need to manually hit the reset button

on the board to properly reset the device after flashing.



Debugging

=========
@@ -287,15 +293,8 @@ using the TI UniFlash tool for certificate programming. 


Limitations

***********

The following features are not supported in Zephyr v1.14:



- IPv6: While the hardware supports it, it has yet to be fully implemented

  in the SimpleLink Wi-Fi driver.

- static IP address: It is not currently possible to set

  :option:`CONFIG_NET_CONFIG_SETTINGS` to ``y`` and assign a static IP

  address to the device via :option:`CONFIG_NET_CONFIG_MY_IPV4_ADDR`. DHCP

  is automatically handled by the SimpleLink Wi-Fi driver to obtain an

  address dynamically.

- While the hardware supports it, IPv6 has yet to be fully implemented

  in the SimpleLink Wi-Fi device driver in Zephyr.



References

**********

CRA Git | Maintained and supported by SUSTech CRA and CCSE