doc: boards: update JLink details for NXP i.MX RT boards (2d8857f2) · Commits · Wenxi XU / zephyr

boards/arm/mimxrt1060_evk/doc/index.rst

+5 −2

Original line number	Diff line number	Diff line
		@@ -319,8 +319,8 @@ path.

		There are two options: the onboard debug circuit can be updated with Segger
		J-Link firmware, or :ref:`jlink-external-debug-probe` can be attached to the
		EVK. See `Using J-Link with MIMXRT1060-EVK or MIMXRT1064-EVK`_ for more
		details.
		EVK. See `Using J-Link with MIMXRT1060-EVK or MIMXRT1064-EVK`_ or
		`Using J-Link with MIMXRT1060-EVKB`_ for more details.

		Configuring a Console
		=====================
		@@ -437,3 +437,6 @@ connected to the EVK properly. See :ref:`Using J-Link RT1060` for more details.

		.. _Using J-Link with MIMXRT1060-EVK or MIMXRT1064-EVK:
		https://community.nxp.com/t5/i-MX-RT-Knowledge-Base/Using-J-Link-with-MIMXRT1060-EVK-or-MIMXRT1064-EVK/ta-p/1281149

		.. _Using J-Link with MIMXRT1060-EVKB:
		https://community.nxp.com/t5/i-MX-RT-Knowledge-Base/Using-J-Link-with-MIMXRT1060-EVKB/ta-p/1452717

+9 −4

Original line number	Diff line number	Diff line
		@@ -199,15 +199,17 @@ however the :ref:`pyocd-debug-host-tools` do not yet support programming the
		external flashes on this board so you must reconfigure the board for one of the
		following debug probes instead.

		:ref:`jlink-external-debug-probe`
		.. _Using J-Link RT1160:

		Using J-Link
		---------------------------------

		Install the :ref:`jlink-debug-host-tools` and make sure they are in your search
		path.

		Attach a J-Link 20-pin connector to J1. Check that jumpers J6 and J7
		are off (they are on by default when boards ship from the factory) to
		ensure SWD signals are disconnected from the OpenSDA microcontroller.
		There are two options: the onboard debug circuit can be updated with Segger
		J-Link firmware, or :ref:`jlink-external-debug-probe` can be attached to the
		EVK. See `Using J-Link with MIMXRT1160-EVK or MIMXRT1170-EVK`_ for more details.

		Configuring a Console
		=====================
		@@ -280,3 +282,6 @@ should see the following message in the terminal:

		.. _i.MX RT1160 Reference Manual:
		https://www.nxp.com/webapp/Download?colCode=IMXRT1160RM

		.. _Using J-Link with MIMXRT1160-EVK or MIMXRT1170-EVK:
		https://community.nxp.com/t5/i-MX-RT-Knowledge-Base/Using-J-Link-with-MIMXRT1160-EVK-or-MIMXRT1170-EVK/ta-p/1529760

+9 −4

Original line number	Diff line number	Diff line
		@@ -239,15 +239,17 @@ however the :ref:`pyocd-debug-host-tools` do not yet support programming the
		external flashes on this board so you must reconfigure the board for one of the
		following debug probes instead.

		:ref:`jlink-external-debug-probe`
		.. _Using J-Link RT1170:

		Using J-Link
		---------------------------------

		Install the :ref:`jlink-debug-host-tools` and make sure they are in your search
		path.

		Attach a J-Link 20-pin connector to J1. Check that jumpers J6 and J7
		are off (they are on by default when boards ship from the factory) to
		ensure SWD signals are disconnected from the OpenSDA microcontroller.
		There are two options: the onboard debug circuit can be updated with Segger
		J-Link firmware, or :ref:`jlink-external-debug-probe` can be attached to the
		EVK. See `Using J-Link with MIMXRT1160-EVK or MIMXRT1170-EVK`_ for more details.

		Configuring a Console
		=====================
		@@ -320,3 +322,6 @@ should see the following message in the terminal:

		.. _i.MX RT1170 Reference Manual:
		https://www.nxp.com/webapp/Download?colCode=IMXRT1170RM

		.. _Using J-Link with MIMXRT1160-EVK or MIMXRT1170-EVK:
		https://community.nxp.com/t5/i-MX-RT-Knowledge-Base/Using-J-Link-with-MIMXRT1160-EVK-or-MIMXRT1170-EVK/ta-p/1529760