Loading doc/releases/release-notes-4.0.rst +139 −1 Original line number Diff line number Diff line Loading @@ -80,9 +80,12 @@ Architectures * ARM * Added support of device memory attributes on Cortex-M (arm_mpu_v8) * ARM64 * Added initial support for :c:func:`arch_stack_walk` that supports unwinding via esf only * Added sys_arch_reboot() support to ARM64 * Added support for demand paging. Loading Loading @@ -151,6 +154,22 @@ Bluetooth :c:func:`bt_conn_le_create` and :c:func:`bt_conn_le_create_synced` return an error if the connection pointer passed as an argument is not NULL. * Fixed an ltk derive issue in L2CAP * Added listener callback for discovery (BR) * Corrected BR bonding type (SSP) * Added support for non-bondable mode (SSP) * Changed SSP so that no MITM if required level is less than L3 * Added checking the receiving buffer length before pulling data (AVDTP) * Added support of security level 4 to SSP * Fixed LE LTK cannot be derived * Added support for Multi-Command Packet (l2cap) * Improved the L2CAP code to Set flags in CFG RSP * Improved the L2CAP code to handle all configuration options * Improved the SSP code to clear pairing flag if ssp pairing completed area * Improved the SMP code to check if remote supports CID 0x0007 * Added support for SMP CT2 flag * Improved the SSP code so the proper callback is called when pairing fails * Controller * Added Periodic Advertising Sync Transfer (PAST) support with support for both sending and receiving roles. Loading @@ -173,10 +192,14 @@ Boards & SoC Support * Added STM32U0 series with GPIO, Serial, I2C, DAC, ADC, flash, PWM and counter driver support. * Added STM32WB0 series with GPIO, Serial, I2C, SPI, ADC, DMA and flash driver support. * Added STM32U545xx SoC variant. * Added NXP i.MX93's Cortex-M33 core * Added NXP MCXW71, MCXC242, MCXA156, MCXN236, MCXC444, RT1180 * Made these changes in other SoC series: * NXP S32Z270: Added support for the new silicon cut version 2.0. Note that the previous * NXP s32k3: fixed RAM retention issue * NXP s32k1: obtain system clock frequency from Devicetree versions (1.0 and 1.1) are no longer supported. * Added ESP32 WROVER-E-N16R4 variant. * STM32H5: Added support for OpenOCD through STMicroelectronics OpenOCD fork. Loading @@ -184,6 +207,19 @@ Boards & SoC Support * Silabs Series 2: Use oscillator, clock and DCDC configuration from device tree during init. * Silabs Series 2: Added initialization for SMU (Security Management Unit). * Silabs Series 2: Use sleeptimer as the default OS timer instead of systick. * NXP i.MX8MP: Enable the IRQ_STEER interrupt controller. * NXP RWxxx: * added additional support to Wakeup from low power modes * RW61x: increased main stack size to avoid stack overflows when running BLE * RW612: enabled SCTIMER * NXP IMXRT: Fixed flexspi boot issue caused by am erroneous relocation of the Flash Configuration Block of Kconfig defaults being sourced * NXP RT11xx: enabled FlexIO * NXP IMXRT116x: Fixed bus clocking to align with the settings of the MCUXpresso SDK * NXP mimxrt685: fixed clocks to enable DMIC * NXP MCX N Series: Fixed NXP LPSPI native chip select when using synchronous API with DMA bug * Added support for these boards: Loading Loading @@ -249,6 +285,7 @@ Boards & SoC Support * :zephyr:board:`WeAct Studio USB2CANFDV1 <usb2canfdv1>` (``usb2canfdv1``) * :zephyr:board:`Witte Technology Linum Board <linum>` (``linum``) * Made these board changes: * :ref:`native_posix<native_posix>` has been deprecated in favour of Loading @@ -271,6 +308,15 @@ Boards & SoC Support * Added Thingy53 forwarding of network core pins to network core for SPI peripheral (disabled by default) including pin mappings. * Added uart, flexio pwm, flexio spi, watchdog, flash, rtc, i2c, lpspi, edma, gpio, acmp, adc and lptmr support to NXP ``frdm_ke17z`` and ``frdm_ke17z512`` * Enabled support for MCUmgr on NXP boards * Enabled MCUboot, FlexCAN, LPI2C, VREF, LPADC and timers (TPM, LPTMR, counter, watchdog) on NXP ``frdm_mcxw71`` * Enabled I2C, PWM on NXP ``imx95_evk`` * Enabled FLEXCAN, LPI2C on NXP ``s32z2xxdc2`` * Enabled DSPI and EDMA3 on NXP ``s32z270dc2`` * Enabled ENET ethernet on NXP ``imx8mm`` and ``imx8mn`` * Added support for the NXP ``imx8qm`` and ``imx8qxp`` DSP core to enable the openAMP sample * Added support for the following shields: Loading Loading @@ -306,6 +352,9 @@ Build system and Infrastructure * Added support for RAM-load MCUboot operating mode in build system, including sysbuild support. * Added a script parameter to Twister to enable HW specific arguments, such as a system specific timeout Documentation ************* Loading Loading @@ -338,6 +387,7 @@ Drivers and Sensors * STM32H7: Added support for higher sampling frequencies thanks to boost mode implementation. * Added initial support for Renesas RA8 ADC driver (:dtcompatible:`renesas,ra-adc`) * Added driver for Analog Devices MAX32 SoC series (:dtcompatible:`adi,max32-adc`). * Added support for NXP S32 SAR_ADC (:dtcompatible:`nxp,s32-adc-sar`) * Battery Loading @@ -363,6 +413,10 @@ Drivers and Sensors :dtcompatible:`renesas,ra-cgc-pll-out`) * Silabs: Added support for Series 2+ Clock Management Unit (see :dtcompatible:`silabs,series-clock`) * Codec (Audio) * Added a driver for the Wolfson WM8904 audio codec (:dtcompatible:`wolfson,wm8904`) * Comparator * Introduced comparator device driver subsystem selected with :kconfig:option:`CONFIG_COMPARATOR` Loading @@ -384,6 +438,12 @@ Drivers and Sensors * DAC * DAC API now supports specifying channel path as internal. Support has been added in STM32 drivers. * Updated the NXP counter_mcux_lptmr driver to support multiple instances of the lptmr peripheral. * Updated the initialization of clocks for the NXP LPTMR driver * Converted the NXP S32 System Timer Module driver to native Zephyr code * Converted NXP S32 Software Watchdog Timer driver to native Zephyr code * Added support late and short relative alarms area to NXP nxp_sys_timer (:dtcompatible:`nxp,s32-sys-timer`) * Disk Loading @@ -407,6 +467,8 @@ Drivers and Sensors * DMA * Added driver for Analog Devices MAX32 SoC series (:dtcompatible:`adi,max32-dma`). * Added flip feature to the NXP dma_mcux_pxp driver (:dtcompatible:`nxp,pxp`) * Added support for eDMAv5 and cyclic mode (:github:`80584`) to the NXP EMDA driver (:dtcompatible:`nxp,edma`) * EEPROM Loading Loading @@ -503,6 +565,8 @@ Drivers and Sensors * Implemented readout protection handling (RDP levels) for STM32F7 SoCs. * Added initial support for Renesas RA8 Flash controller driver (:dtcompatible:`renesas,ra-flash-hp-controller`) * Added driver for Analog Devices MAX32 SoC series (:dtcompatible:`adi,max32-flash-controller`). * Added support for W25Q512JV and W25Q512NW-IQ/IN to NXP's MCUX Flexspi driver * Renamed the binding :dtcompatible:`nxp,iap-msf1` to :dtcompatible:`nxp,msf1` for accuracy * GNSS Loading @@ -510,6 +574,8 @@ Drivers and Sensors * tle9104: Add support for the parallel output mode via setting the properties ``parallel-out12`` and ``parallel-out34``. * Converted the NXP S32 SIUL2 drivers to native Zephyr code * Converted the NXP wake-up drivers to native Zephyr code * Hardware info Loading Loading @@ -563,9 +629,17 @@ Drivers and Sensors * Fixed broken ESP32 input touch sensor driver. * gt911: * Fixed the INT pin to be always set during probe to allow for proper initialization * Fixed OOB buffer write to touch points array * Add support for multitouch events * Interrupt * Updated ESP32 family interrupt allocator with proper IRQ flags and priorities. * Implemented a function to set pending interrupts for Arm GIC * Added a safe configuration option so multiple OS'es can share the same GIC and avoid reconfiguring the distributor * LED Loading Loading @@ -595,6 +669,10 @@ Drivers and Sensors * Added NXP IMX NETC mdio driver. * NXP ENET MDIO: Fixed inconsistent behavior by keeping the mdio interrupt enabled all the time. * MEMC * Add driver for APS6404L PSRAM using NXP FLEXSPI * MFD * Modem Loading @@ -607,7 +685,12 @@ Drivers and Sensors * Added bitbang MIPI-DBI driver, supporting 8080 and 6800 mode (:dtcompatible:`zephyr,mipi-dbi-bitbang`). * Added support for STM32 FMC memory controller (:dtcompatible:`st,stm32-fmc-mipi-dbi`). * Added support for 8080 mode to NXP LCDIC controller. * Added support for 8080 mode to NXP LCDIC controller (:dtcompatible:`nxp,lcdic`). * Fixed the calculation of the reset delay for NXP's LCD controller (:dtcompatible:`nxp,lcdic`) * MIPI-CSI * Improve NXP CSI and MIPI_CSI2Rx drivers to support varibale frame rates * MSPI Loading @@ -625,6 +708,7 @@ Drivers and Sensors * rpi_pico: The driver now configures the divide ratio adaptively. * Added initial support for Renesas RA8 PWM driver (:dtcompatible:`renesas,ra8-pwm`) * Added driver for Analog Devices MAX32 SoC series (:dtcompatible:`adi,max32-pwm`). * Fixed a build issue of the NXP TPM driver for variants without the capability to combine channels * Regulators Loading @@ -636,13 +720,22 @@ Drivers and Sensors * RTC * STM32: HSE can now be used as domain clock. * Added the NXP IRTC Driver. * RTIO * SAI * Improved NXP's SAI driver to use a default clock if none is provided in the DT * Fixed a bug in the NXP SAI driver that caused a crash on a FIFO under- and overrun * Fixed a bug that reset the NXP ESAI during initialization (unnecessary) * Added support for PM operations in NXP's SAI driver * SDHC * Added ESP32-S3 driver support. * SPI SDHC driver now handles SPI devices with runtime PM support correctly * Improved NXP's imx SDHC driver to assume card is present if no detection method is provided * Sensors Loading Loading @@ -701,6 +794,9 @@ Drivers and Sensors * Added Würth Elektronik HIDS-2525020210002 :dtcompatible:`we,wsen-hids-2525020210002` humidity sensor driver. * Added general samples for triggers * Added driver for NXP's fxls8974 accelerometer * Serial * LiteX: Renamed the ``compatible`` from ``litex,uart0`` to :dtcompatible:`litex,uart`. Loading Loading @@ -736,6 +832,8 @@ Drivers and Sensors * Added support for USB HS on STM32U59x/STM32U5Ax SoC variants. * Enhanced DWC2 UDC driver * Added UDC drivers for Smartbond, NuMaker USBD and RP2040 device controllers * Enabled SoF in NXP USB drivers (UDC) * Enabled cache maintenance in the NXP EHCI USB driver * Video Loading @@ -757,6 +855,9 @@ Drivers and Sensors * STM32: Implemented :c:func:`video_get_ctrl` and :c:func:`video_set_ctrl` APIs. * Removed an init order circular dependency for the camera pipeline on NXP RT10xx platforms (:github:`80304`) * Added an NXP's smartdma based video driver (:dtcompatible:`nxp,video-smartdma`) * Added frame interval APIs to support variable frame rates (video_sw_generator.c) * Added image controls to the OV5640 driver * W1 Loading Loading @@ -883,6 +984,7 @@ Networking * Fixed IGMPv2 queries processing when IGMPv3 is enabled. * Fixed :kconfig:option:`CONFIG_NET_NATIVE_IPV4` dependency for native IPv4 options. * Fix net_pkt leak in :c:func:`send_ipv4_fragment`.` * Fixed tx_pkts slab leak in send_ipv4_fragment * IPv6: Loading @@ -893,9 +995,13 @@ Networking * Fixed unneeded error logging in case of dropped NS packets. * Fixed accepting of incoming DAD NS messages. * Various fixes improving IPv6 routing. * Added onlink and forwarding check to IPv6-prepare * LwM2M: * Location object: optional resources altitude, radius, and speed can now be used optionally as per the location object's specification. Users of these resources will now need to provide a read buffer. * Added TLS_ECDHE_ECDSA_WITH_AES_128_CCM_8 to DTLS cipher list. * Added LwM2M shell command for listing resources. * Added LwM2M shell command to list observations. Loading Loading @@ -1031,6 +1137,11 @@ Networking * Wi-Fi: * Add a 80211R fast BSS transition argument usage to the wifi shell's connect command. * Fixed the shell's ap config command using the sta interface area * Added AP configuration cmd support to the NXP Wifi drivers * Fixed the dormant state in the NXP WiFi driver to be set to off once a connection to an AP is achieved * zperf: * Added support for USB CDC NCM in the zperf sample. Loading Loading @@ -1062,6 +1173,7 @@ Devicetree so that they can be used in string properties. * Renamed ``power-domain`` base property to ``power-domains``, and introduced ``power-domain-names`` property. ``#power-domain-cells`` is now required as well. * Moved the NXP Remote Domain Controller property to its own schema file Kconfig ******* Loading Loading @@ -1185,6 +1297,7 @@ Libraries / Subsystems * LittleFS: The module has been updated with changes committed upstream from version 2.8.1, the last module update, up to and including the released version 2.9.3. * Fixed static analysis error caused by mismatched variable assignment in NVS * LittleFS: Fixed an issue where the DTS option for configuring block cycles for LittleFS instances was ignored (:github:`79072`). Loading Loading @@ -1222,6 +1335,11 @@ Libraries / Subsystems * Task Watchdog * Tracing * Added support for a "user event" trace, with the purpose to allow driver or application developers to quickly add tracing for events for debug purposes * POSIX API * LoRa/LoRaWAN Loading Loading @@ -1274,6 +1392,10 @@ HALs * Synced HAL to version v5.1.4 to update SoCs low level files, RF libraries and overall driver support. * NXP * Updated the MCUX HAL to the SDK version 2.16.000 * Updated the NXP S32ZE HAL drivers to version 2.0.0 * Silabs Loading Loading @@ -1331,6 +1453,8 @@ MCUboot * Fixed RAM load chain load address. * Fixed issue with properly retrieving image headers after interrupted swap-scratch in bootutil. * The MCUboot version in this release is version ``2.1.0+0-dev``. * Add the following nxp boards as test targets area: ``frdm_ke17z``, ``frdm_ke17z512``, ``rddrone_fmuk66``, ``twr_ke18f``, ``frdm_mcxn947/mcxn947/cpu0`` OSDP **** Loading @@ -1352,6 +1476,7 @@ LVGL * Added definition of ``LV_ATTRIBUTE_MEM_ALIGN`` so library internal data structures can be aligned to a specific boundary. * Provided alignment definition to accommodate the alignment requirement of some GPU's zcbor ***** Loading @@ -1373,9 +1498,22 @@ Tests and Samples * Together with the deprecation of :ref:`native_posix<native_posix>`, many tests which were explicitly run in native_posix now run in :ref:`native_sim<native_sim>` instead. native_posix as a platform remains tested though. * Added documentation (readme) for the erase_blocks flash test * Extended the tests of counter_basic_api with a testcase for counters wihtout alarms * Excluded NXP RW612 based boards from the WiFi test suite, as these boards require binary blobs be downloaded in order to build as expected * Added support for testing SDMMC devices to the fatfs API test * Extended net/vlan to add IPv6 prefix config to each vlan-iface * Enhanced the camera fixture test by adding a color bar to enable automation * Fixed floating point logging issue in the video driver sample code * Added a number crunching (maths such as FFT, echo cancellation) sample using optimized an library for the NXP ADSP board * Tailored the SPI_LOOPBACK test to the limitations of NXP Kinetis MCU's * Enabled the video sample to run video capture (samples/drivers/video) * Added :zephyr:code-sample:`smf_calculator` sample demonstrating the usage of the State Machine framework in combination with LVGL to create a simple calculator application. * Consolidated display sample where possible to use a single testcase for all shields Issue Related Items ******************* Loading Loading
doc/releases/release-notes-4.0.rst +139 −1 Original line number Diff line number Diff line Loading @@ -80,9 +80,12 @@ Architectures * ARM * Added support of device memory attributes on Cortex-M (arm_mpu_v8) * ARM64 * Added initial support for :c:func:`arch_stack_walk` that supports unwinding via esf only * Added sys_arch_reboot() support to ARM64 * Added support for demand paging. Loading Loading @@ -151,6 +154,22 @@ Bluetooth :c:func:`bt_conn_le_create` and :c:func:`bt_conn_le_create_synced` return an error if the connection pointer passed as an argument is not NULL. * Fixed an ltk derive issue in L2CAP * Added listener callback for discovery (BR) * Corrected BR bonding type (SSP) * Added support for non-bondable mode (SSP) * Changed SSP so that no MITM if required level is less than L3 * Added checking the receiving buffer length before pulling data (AVDTP) * Added support of security level 4 to SSP * Fixed LE LTK cannot be derived * Added support for Multi-Command Packet (l2cap) * Improved the L2CAP code to Set flags in CFG RSP * Improved the L2CAP code to handle all configuration options * Improved the SSP code to clear pairing flag if ssp pairing completed area * Improved the SMP code to check if remote supports CID 0x0007 * Added support for SMP CT2 flag * Improved the SSP code so the proper callback is called when pairing fails * Controller * Added Periodic Advertising Sync Transfer (PAST) support with support for both sending and receiving roles. Loading @@ -173,10 +192,14 @@ Boards & SoC Support * Added STM32U0 series with GPIO, Serial, I2C, DAC, ADC, flash, PWM and counter driver support. * Added STM32WB0 series with GPIO, Serial, I2C, SPI, ADC, DMA and flash driver support. * Added STM32U545xx SoC variant. * Added NXP i.MX93's Cortex-M33 core * Added NXP MCXW71, MCXC242, MCXA156, MCXN236, MCXC444, RT1180 * Made these changes in other SoC series: * NXP S32Z270: Added support for the new silicon cut version 2.0. Note that the previous * NXP s32k3: fixed RAM retention issue * NXP s32k1: obtain system clock frequency from Devicetree versions (1.0 and 1.1) are no longer supported. * Added ESP32 WROVER-E-N16R4 variant. * STM32H5: Added support for OpenOCD through STMicroelectronics OpenOCD fork. Loading @@ -184,6 +207,19 @@ Boards & SoC Support * Silabs Series 2: Use oscillator, clock and DCDC configuration from device tree during init. * Silabs Series 2: Added initialization for SMU (Security Management Unit). * Silabs Series 2: Use sleeptimer as the default OS timer instead of systick. * NXP i.MX8MP: Enable the IRQ_STEER interrupt controller. * NXP RWxxx: * added additional support to Wakeup from low power modes * RW61x: increased main stack size to avoid stack overflows when running BLE * RW612: enabled SCTIMER * NXP IMXRT: Fixed flexspi boot issue caused by am erroneous relocation of the Flash Configuration Block of Kconfig defaults being sourced * NXP RT11xx: enabled FlexIO * NXP IMXRT116x: Fixed bus clocking to align with the settings of the MCUXpresso SDK * NXP mimxrt685: fixed clocks to enable DMIC * NXP MCX N Series: Fixed NXP LPSPI native chip select when using synchronous API with DMA bug * Added support for these boards: Loading Loading @@ -249,6 +285,7 @@ Boards & SoC Support * :zephyr:board:`WeAct Studio USB2CANFDV1 <usb2canfdv1>` (``usb2canfdv1``) * :zephyr:board:`Witte Technology Linum Board <linum>` (``linum``) * Made these board changes: * :ref:`native_posix<native_posix>` has been deprecated in favour of Loading @@ -271,6 +308,15 @@ Boards & SoC Support * Added Thingy53 forwarding of network core pins to network core for SPI peripheral (disabled by default) including pin mappings. * Added uart, flexio pwm, flexio spi, watchdog, flash, rtc, i2c, lpspi, edma, gpio, acmp, adc and lptmr support to NXP ``frdm_ke17z`` and ``frdm_ke17z512`` * Enabled support for MCUmgr on NXP boards * Enabled MCUboot, FlexCAN, LPI2C, VREF, LPADC and timers (TPM, LPTMR, counter, watchdog) on NXP ``frdm_mcxw71`` * Enabled I2C, PWM on NXP ``imx95_evk`` * Enabled FLEXCAN, LPI2C on NXP ``s32z2xxdc2`` * Enabled DSPI and EDMA3 on NXP ``s32z270dc2`` * Enabled ENET ethernet on NXP ``imx8mm`` and ``imx8mn`` * Added support for the NXP ``imx8qm`` and ``imx8qxp`` DSP core to enable the openAMP sample * Added support for the following shields: Loading Loading @@ -306,6 +352,9 @@ Build system and Infrastructure * Added support for RAM-load MCUboot operating mode in build system, including sysbuild support. * Added a script parameter to Twister to enable HW specific arguments, such as a system specific timeout Documentation ************* Loading Loading @@ -338,6 +387,7 @@ Drivers and Sensors * STM32H7: Added support for higher sampling frequencies thanks to boost mode implementation. * Added initial support for Renesas RA8 ADC driver (:dtcompatible:`renesas,ra-adc`) * Added driver for Analog Devices MAX32 SoC series (:dtcompatible:`adi,max32-adc`). * Added support for NXP S32 SAR_ADC (:dtcompatible:`nxp,s32-adc-sar`) * Battery Loading @@ -363,6 +413,10 @@ Drivers and Sensors :dtcompatible:`renesas,ra-cgc-pll-out`) * Silabs: Added support for Series 2+ Clock Management Unit (see :dtcompatible:`silabs,series-clock`) * Codec (Audio) * Added a driver for the Wolfson WM8904 audio codec (:dtcompatible:`wolfson,wm8904`) * Comparator * Introduced comparator device driver subsystem selected with :kconfig:option:`CONFIG_COMPARATOR` Loading @@ -384,6 +438,12 @@ Drivers and Sensors * DAC * DAC API now supports specifying channel path as internal. Support has been added in STM32 drivers. * Updated the NXP counter_mcux_lptmr driver to support multiple instances of the lptmr peripheral. * Updated the initialization of clocks for the NXP LPTMR driver * Converted the NXP S32 System Timer Module driver to native Zephyr code * Converted NXP S32 Software Watchdog Timer driver to native Zephyr code * Added support late and short relative alarms area to NXP nxp_sys_timer (:dtcompatible:`nxp,s32-sys-timer`) * Disk Loading @@ -407,6 +467,8 @@ Drivers and Sensors * DMA * Added driver for Analog Devices MAX32 SoC series (:dtcompatible:`adi,max32-dma`). * Added flip feature to the NXP dma_mcux_pxp driver (:dtcompatible:`nxp,pxp`) * Added support for eDMAv5 and cyclic mode (:github:`80584`) to the NXP EMDA driver (:dtcompatible:`nxp,edma`) * EEPROM Loading Loading @@ -503,6 +565,8 @@ Drivers and Sensors * Implemented readout protection handling (RDP levels) for STM32F7 SoCs. * Added initial support for Renesas RA8 Flash controller driver (:dtcompatible:`renesas,ra-flash-hp-controller`) * Added driver for Analog Devices MAX32 SoC series (:dtcompatible:`adi,max32-flash-controller`). * Added support for W25Q512JV and W25Q512NW-IQ/IN to NXP's MCUX Flexspi driver * Renamed the binding :dtcompatible:`nxp,iap-msf1` to :dtcompatible:`nxp,msf1` for accuracy * GNSS Loading @@ -510,6 +574,8 @@ Drivers and Sensors * tle9104: Add support for the parallel output mode via setting the properties ``parallel-out12`` and ``parallel-out34``. * Converted the NXP S32 SIUL2 drivers to native Zephyr code * Converted the NXP wake-up drivers to native Zephyr code * Hardware info Loading Loading @@ -563,9 +629,17 @@ Drivers and Sensors * Fixed broken ESP32 input touch sensor driver. * gt911: * Fixed the INT pin to be always set during probe to allow for proper initialization * Fixed OOB buffer write to touch points array * Add support for multitouch events * Interrupt * Updated ESP32 family interrupt allocator with proper IRQ flags and priorities. * Implemented a function to set pending interrupts for Arm GIC * Added a safe configuration option so multiple OS'es can share the same GIC and avoid reconfiguring the distributor * LED Loading Loading @@ -595,6 +669,10 @@ Drivers and Sensors * Added NXP IMX NETC mdio driver. * NXP ENET MDIO: Fixed inconsistent behavior by keeping the mdio interrupt enabled all the time. * MEMC * Add driver for APS6404L PSRAM using NXP FLEXSPI * MFD * Modem Loading @@ -607,7 +685,12 @@ Drivers and Sensors * Added bitbang MIPI-DBI driver, supporting 8080 and 6800 mode (:dtcompatible:`zephyr,mipi-dbi-bitbang`). * Added support for STM32 FMC memory controller (:dtcompatible:`st,stm32-fmc-mipi-dbi`). * Added support for 8080 mode to NXP LCDIC controller. * Added support for 8080 mode to NXP LCDIC controller (:dtcompatible:`nxp,lcdic`). * Fixed the calculation of the reset delay for NXP's LCD controller (:dtcompatible:`nxp,lcdic`) * MIPI-CSI * Improve NXP CSI and MIPI_CSI2Rx drivers to support varibale frame rates * MSPI Loading @@ -625,6 +708,7 @@ Drivers and Sensors * rpi_pico: The driver now configures the divide ratio adaptively. * Added initial support for Renesas RA8 PWM driver (:dtcompatible:`renesas,ra8-pwm`) * Added driver for Analog Devices MAX32 SoC series (:dtcompatible:`adi,max32-pwm`). * Fixed a build issue of the NXP TPM driver for variants without the capability to combine channels * Regulators Loading @@ -636,13 +720,22 @@ Drivers and Sensors * RTC * STM32: HSE can now be used as domain clock. * Added the NXP IRTC Driver. * RTIO * SAI * Improved NXP's SAI driver to use a default clock if none is provided in the DT * Fixed a bug in the NXP SAI driver that caused a crash on a FIFO under- and overrun * Fixed a bug that reset the NXP ESAI during initialization (unnecessary) * Added support for PM operations in NXP's SAI driver * SDHC * Added ESP32-S3 driver support. * SPI SDHC driver now handles SPI devices with runtime PM support correctly * Improved NXP's imx SDHC driver to assume card is present if no detection method is provided * Sensors Loading Loading @@ -701,6 +794,9 @@ Drivers and Sensors * Added Würth Elektronik HIDS-2525020210002 :dtcompatible:`we,wsen-hids-2525020210002` humidity sensor driver. * Added general samples for triggers * Added driver for NXP's fxls8974 accelerometer * Serial * LiteX: Renamed the ``compatible`` from ``litex,uart0`` to :dtcompatible:`litex,uart`. Loading Loading @@ -736,6 +832,8 @@ Drivers and Sensors * Added support for USB HS on STM32U59x/STM32U5Ax SoC variants. * Enhanced DWC2 UDC driver * Added UDC drivers for Smartbond, NuMaker USBD and RP2040 device controllers * Enabled SoF in NXP USB drivers (UDC) * Enabled cache maintenance in the NXP EHCI USB driver * Video Loading @@ -757,6 +855,9 @@ Drivers and Sensors * STM32: Implemented :c:func:`video_get_ctrl` and :c:func:`video_set_ctrl` APIs. * Removed an init order circular dependency for the camera pipeline on NXP RT10xx platforms (:github:`80304`) * Added an NXP's smartdma based video driver (:dtcompatible:`nxp,video-smartdma`) * Added frame interval APIs to support variable frame rates (video_sw_generator.c) * Added image controls to the OV5640 driver * W1 Loading Loading @@ -883,6 +984,7 @@ Networking * Fixed IGMPv2 queries processing when IGMPv3 is enabled. * Fixed :kconfig:option:`CONFIG_NET_NATIVE_IPV4` dependency for native IPv4 options. * Fix net_pkt leak in :c:func:`send_ipv4_fragment`.` * Fixed tx_pkts slab leak in send_ipv4_fragment * IPv6: Loading @@ -893,9 +995,13 @@ Networking * Fixed unneeded error logging in case of dropped NS packets. * Fixed accepting of incoming DAD NS messages. * Various fixes improving IPv6 routing. * Added onlink and forwarding check to IPv6-prepare * LwM2M: * Location object: optional resources altitude, radius, and speed can now be used optionally as per the location object's specification. Users of these resources will now need to provide a read buffer. * Added TLS_ECDHE_ECDSA_WITH_AES_128_CCM_8 to DTLS cipher list. * Added LwM2M shell command for listing resources. * Added LwM2M shell command to list observations. Loading Loading @@ -1031,6 +1137,11 @@ Networking * Wi-Fi: * Add a 80211R fast BSS transition argument usage to the wifi shell's connect command. * Fixed the shell's ap config command using the sta interface area * Added AP configuration cmd support to the NXP Wifi drivers * Fixed the dormant state in the NXP WiFi driver to be set to off once a connection to an AP is achieved * zperf: * Added support for USB CDC NCM in the zperf sample. Loading Loading @@ -1062,6 +1173,7 @@ Devicetree so that they can be used in string properties. * Renamed ``power-domain`` base property to ``power-domains``, and introduced ``power-domain-names`` property. ``#power-domain-cells`` is now required as well. * Moved the NXP Remote Domain Controller property to its own schema file Kconfig ******* Loading Loading @@ -1185,6 +1297,7 @@ Libraries / Subsystems * LittleFS: The module has been updated with changes committed upstream from version 2.8.1, the last module update, up to and including the released version 2.9.3. * Fixed static analysis error caused by mismatched variable assignment in NVS * LittleFS: Fixed an issue where the DTS option for configuring block cycles for LittleFS instances was ignored (:github:`79072`). Loading Loading @@ -1222,6 +1335,11 @@ Libraries / Subsystems * Task Watchdog * Tracing * Added support for a "user event" trace, with the purpose to allow driver or application developers to quickly add tracing for events for debug purposes * POSIX API * LoRa/LoRaWAN Loading Loading @@ -1274,6 +1392,10 @@ HALs * Synced HAL to version v5.1.4 to update SoCs low level files, RF libraries and overall driver support. * NXP * Updated the MCUX HAL to the SDK version 2.16.000 * Updated the NXP S32ZE HAL drivers to version 2.0.0 * Silabs Loading Loading @@ -1331,6 +1453,8 @@ MCUboot * Fixed RAM load chain load address. * Fixed issue with properly retrieving image headers after interrupted swap-scratch in bootutil. * The MCUboot version in this release is version ``2.1.0+0-dev``. * Add the following nxp boards as test targets area: ``frdm_ke17z``, ``frdm_ke17z512``, ``rddrone_fmuk66``, ``twr_ke18f``, ``frdm_mcxn947/mcxn947/cpu0`` OSDP **** Loading @@ -1352,6 +1476,7 @@ LVGL * Added definition of ``LV_ATTRIBUTE_MEM_ALIGN`` so library internal data structures can be aligned to a specific boundary. * Provided alignment definition to accommodate the alignment requirement of some GPU's zcbor ***** Loading @@ -1373,9 +1498,22 @@ Tests and Samples * Together with the deprecation of :ref:`native_posix<native_posix>`, many tests which were explicitly run in native_posix now run in :ref:`native_sim<native_sim>` instead. native_posix as a platform remains tested though. * Added documentation (readme) for the erase_blocks flash test * Extended the tests of counter_basic_api with a testcase for counters wihtout alarms * Excluded NXP RW612 based boards from the WiFi test suite, as these boards require binary blobs be downloaded in order to build as expected * Added support for testing SDMMC devices to the fatfs API test * Extended net/vlan to add IPv6 prefix config to each vlan-iface * Enhanced the camera fixture test by adding a color bar to enable automation * Fixed floating point logging issue in the video driver sample code * Added a number crunching (maths such as FFT, echo cancellation) sample using optimized an library for the NXP ADSP board * Tailored the SPI_LOOPBACK test to the limitations of NXP Kinetis MCU's * Enabled the video sample to run video capture (samples/drivers/video) * Added :zephyr:code-sample:`smf_calculator` sample demonstrating the usage of the State Machine framework in combination with LVGL to create a simple calculator application. * Consolidated display sample where possible to use a single testcase for all shields Issue Related Items ******************* Loading
Yves Vandervennet <yves.vandervennet@nxp.com>Yves Vandervennet <yves.vandervennet@nxp.com>