boards: renesas: update ek_ra8d1 boards doc (1eb0fb20) · Commits · Wenxi XU / zephyr

boards/renesas/ek_ra8d1/doc/index.rst

+1 −2

Changes for boards/renesas/ek_ra8d1/doc/index.rst: 1 added line, 2 removed lines.
Original line number	Diff line number	Diff line
		@@ -102,8 +102,7 @@ Supported Features
		\| OFF \| OFF \| OFF \| OFF \| OFF \| ON \| ON \| OFF \|
		+-------------+-------------+--------------+------------+------------+------------+-------------+-----------+

		- For using the Parallel Graphics Expansion Port (J57) with the Graphics Expansion Board supplied as part of the kit,
		please set switch SW1 as following configuration:
		- For using the Parallel Graphics Expansion Port (J57), please set switch SW1 to the following configuration:

		+-------------+-------------+--------------+------------+------------+------------+-------------+-----------+
		\| SW1-1 PMOD1 \| SW1-2 TRACE \| SW1-3 CAMERA \| SW1-4 ETHA \| SW1-5 ETHB \| SW1-6 GLCD \| SW1-7 SDRAM \| SW1-8 I3C \|

+10 −5

Changes for boards/shields/rtk7eka6m3b00001bu/doc/index.rst: 10 added lines, 5 removed lines.
Original line number	Diff line number	Diff line
		@@ -17,17 +17,22 @@ Pins Assignment of the Renesas RTK7EKA6M3B00001BU Display
		+-----------------+--------------------------+
		\| Connector Pin \| Function \|
		+=================+==========================+
		\| 1 \| Display backlight enable \|
		\| 39 \| Display backlight enable \|
		+-----------------+--------------------------+
		\| 2 \| Touch ctrl I2C SDA \|
		\| 21 \| Touch ctrl I2C SDA \|
		+-----------------+--------------------------+
		\| 3 \| External interrupt \|
		\| 38 \| External interrupt \|
		+-----------------+--------------------------+
		\| 4 \| Touch ctrl I2C SCL \|
		\| 5 \| Touch ctrl I2C SCL \|
		+-----------------+--------------------------+
		\| 6 \| Display reset \|
		\| 35 \| Display reset \|
		+-----------------+--------------------------+

		.. note::

		- To use with EK-RA8D1 board, the :ref:`ek_ra8d1_rtk7eka6m3b00001bu` will be needed to connect this
		shield to the Parallel Graphics Expansion Port (J57).

		Hardware Requirements:
		**********************