boards: arm: nordic: Add BG96 to RAK5010 board (143a7766) · Commits · Wenxi XU / zephyr

boards/arm/rak5010_nrf52840/Kconfig.defconfig

+3 −0

+24 −13

Original line number	Diff line number	Diff line
		@@ -12,11 +12,11 @@
		compatible = "nordic,rak5010_nrf52840";

		chosen {
		zephyr,console = &uart0;
		zephyr,shell-uart = &uart0;
		zephyr,uart-mcumgr = &uart0;
		zephyr,bt-mon-uart = &uart0;
		zephyr,bt-c2h-uart = &uart0;
		zephyr,console = &uart1;
		zephyr,shell-uart = &uart1;
		zephyr,uart-mcumgr = &uart1;
		zephyr,bt-mon-uart = &uart1;
		zephyr,bt-c2h-uart = &uart1;
		zephyr,sram = &sram0;
		zephyr,flash = &flash0;
		zephyr,code-partition = &slot0_partition;
		@@ -54,20 +54,31 @@

		&uart0 {
		compatible = "nordic,nrf-uart";
		status = "okay";
		current-speed = <115200>;
		tx-pin = <6>;
		rx-pin = <8>;
		rts-pin = <7>;
		cts-pin = <11>;

		/* QUECTEL BG9X */
		quectel_bg9x: quectel_bg9x {
		compatible = "quectel,bg9x";
		label = "quectel,bg9x";
		mdm-power-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
		mdm-reset-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
		mdm-dtr-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
		mdm-wdisable-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
		status = "okay";
		tx-pin = <33>;
		rx-pin = <34>;
		};
		};

		&uart1 {
		compatible = "nordic,nrf-uart";
		status = "okay";
		current-speed = <115200>;
		tx-pin = <8>;
		rx-pin = <6>;
		rts-pin = <7>;
		cts-pin = <11>;
		status = "okay";
		tx-pin = <33>;
		rx-pin = <34>;
		};

		&i2c1 {

+6 −0

Original line number	Diff line number	Diff line
		@@ -907,6 +907,12 @@ static void pin_init(void)
		{
		LOG_INF("Setting Modem Pins");

		#if DT_INST_NODE_HAS_PROP(0, mdm_wdisable_gpios)
		LOG_INF("Deactivate W Disable");
		modem_pin_write(&mctx, MDM_WDISABLE, 0);
		k_sleep(K_MSEC(250));
		#endif

		/* NOTE: Per the BG95 document, the Reset pin is internally connected to the
		* Power key pin.
		*/

+9 −0

Original line number	Diff line number	Diff line
		@@ -65,6 +65,9 @@ enum mdm_control_pins {
		#if DT_INST_NODE_HAS_PROP(0, mdm_dtr_gpios)
		MDM_DTR,
		#endif
		#if DT_INST_NODE_HAS_PROP(0, mdm_wdisable_gpios)
		MDM_WDISABLE,
		#endif
		};

		/* driver data */
		@@ -135,6 +138,12 @@ static struct modem_pin modem_pins[] = {
		DT_INST_GPIO_PIN(0, mdm_dtr_gpios),
		DT_INST_GPIO_FLAGS(0, mdm_dtr_gpios) \| GPIO_OUTPUT_LOW),
		#endif
		#if DT_INST_NODE_HAS_PROP(0, mdm_wdisable_gpios)
		/* MDM_WDISABLE */
		MODEM_PIN(DT_INST_GPIO_LABEL(0, mdm_wdisable_gpios),
		DT_INST_GPIO_PIN(0, mdm_wdisable_gpios),
		DT_INST_GPIO_FLAGS(0, mdm_wdisable_gpios) \| GPIO_OUTPUT_LOW),
		#endif
		};

		#endif /* #ifndef QUECTEL_BG9X_H */

+4 −0