Add Segger debug monitor implementation (e2ff2200) · Commits · Wenxi XU / Segger

SEGGER/DebugMon/JLINK_MONITOR.c

0 → 100644

+152 −0

Original line number	Diff line number	Diff line
		/*********************************************************************
		* SEGGER Microcontroller GmbH *
		* The Embedded Experts *
		**********************************************************************
		* *
		* (c) 1995 - 2018 SEGGER Microcontroller GmbH *
		* *
		* www.segger.com Support: support@segger.com *
		* *
		**********************************************************************
		* *
		* All rights reserved. *
		* *
		* SEGGER strongly recommends to not make any changes *
		* to or modify the source code of this software in order to stay *
		* compatible with the monitor mode protocol and J-Link. *
		* *
		* Redistribution and use in source and binary forms, with or *
		* without modification, are permitted provided that the following *
		* conditions are met: *
		* *
		* - Redistributions of source code must retain the above copyright *
		* notice, this list of conditions and the following disclaimer. *
		* *
		* - Redistributions in binary form must reproduce the above *
		* copyright notice, this list of conditions and the following *
		* disclaimer in the documentation and/or other materials provided *
		* with the distribution. *
		* *
		* - Neither the name of SEGGER Microcontroller GmbH *
		* nor the names of its contributors may be used to endorse or *
		* promote products derived from this software without specific *
		* prior written permission. *
		* *
		* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
		* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
		* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
		* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
		* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
		* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
		* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
		* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
		* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
		* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
		* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
		* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
		* DAMAGE. *
		* *
		**********************************************************************
		----------------------------------------------------------------------
		File : JLINK_MONITOR.c
		Purpose : Implementation of debug monitor for J-Link monitor mode debug on Cortex-M devices.
		-------- END-OF-HEADER ---------------------------------------------
		*/

		#include "JLINK_MONITOR.h"

		/*********************************************************************
		*
		* Configuration
		*
		**********************************************************************
		*/

		/*********************************************************************
		*
		* Defines
		*
		**********************************************************************
		*/

		/*********************************************************************
		*
		* Types
		*
		**********************************************************************
		*/

		/*********************************************************************
		*
		* Static data
		*
		**********************************************************************
		*/

		/*********************************************************************
		*
		* Local functions
		*
		**********************************************************************
		*/

		/*********************************************************************
		*
		* Global functions
		*
		**********************************************************************
		*/


		/*********************************************************************
		*
		* JLINK_MONITOR_OnExit()
		*
		* Function description
		* Called from DebugMon_Handler(), once per debug exit.
		* May perform some target specific operations to be done on debug mode exit.
		*
		* Notes
		* (1) Must not keep the CPU busy for more than 100 ms
		*/
		void JLINK_MONITOR_OnExit(void) {
		//
		// Add custom code here
		//
		// BSP_ClrLED(0);
		}

		/*********************************************************************
		*
		* JLINK_MONITOR_OnEnter()
		*
		* Function description
		* Called from DebugMon_Handler(), once per debug entry.
		* May perform some target specific operations to be done on debug mode entry
		*
		* Notes
		* (1) Must not keep the CPU busy for more than 100 ms
		*/

		void JLINK_MONITOR_OnEnter(void) {
		// Add custom code here
		//
		// BSP_SetLED(0);
		// BSP_ClrLED(1);
		}

		/*********************************************************************
		*
		* JLINK_MONITOR_OnPoll()
		*
		* Function description
		* Called periodically from DebugMon_Handler(), to perform some actions that need to be performed periodically during debug mode.
		*
		* Notes
		* (1) Must not keep the CPU busy for more than 100 ms
		*/

		void JLINK_MONITOR_OnPoll(void) {
		}

		/**** End Of File ***********************************************/

SEGGER/DebugMon/JLINK_MONITOR_ISR_SES.s

0 → 100644

+927 −0

File added.

Preview size limit exceeded, changes collapsed.

SEGGER/DebugMon/include/JLINK_MONITOR.h

0 → 100644

+65 −0

Original line number	Diff line number	Diff line
		/*********************************************************************
		* SEGGER Microcontroller GmbH *
		* The Embedded Experts *
		**********************************************************************
		* *
		* (c) 1995 - 2018 SEGGER Microcontroller GmbH *
		* *
		* www.segger.com Support: support@segger.com *
		* *
		**********************************************************************
		* *
		* All rights reserved. *
		* *
		* SEGGER strongly recommends to not make any changes *
		* to or modify the source code of this software in order to stay *
		* compatible with the monitor mode protocol and J-Link. *
		* *
		* Redistribution and use in source and binary forms, with or *
		* without modification, are permitted provided that the following *
		* conditions are met: *
		* *
		* - Redistributions of source code must retain the above copyright *
		* notice, this list of conditions and the following disclaimer. *
		* *
		* - Redistributions in binary form must reproduce the above *
		* copyright notice, this list of conditions and the following *
		* disclaimer in the documentation and/or other materials provided *
		* with the distribution. *
		* *
		* - Neither the name of SEGGER Microcontroller GmbH *
		* nor the names of its contributors may be used to endorse or *
		* promote products derived from this software without specific *
		* prior written permission. *
		* *
		* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
		* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
		* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
		* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
		* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
		* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
		* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
		* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
		* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
		* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
		* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
		* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
		* DAMAGE. *
		* *
		**********************************************************************
		----------------------------------------------------------------------
		File : JLINK_MONITOR.h
		Purpose : Header file of debug monitor for J-Link monitor mode debug on Cortex-M devices.
		-------- END-OF-HEADER ---------------------------------------------
		*/

		#ifndef JLINK_MONITOR_H
		#define JLINK_MONITOR_H

		void JLINK_MONITOR_OnExit (void);
		void JLINK_MONITOR_OnEnter (void);
		void JLINK_MONITOR_OnPoll (void);

		#endif

		/**** End Of File ***********************************************/

Admin message