espressif: ESP32-C2 initial support (c3fe516f) · Commits · Wenxi XU / Mcuboot

boot/espressif/CMakeLists.txt

+5 −0

Original line number	Diff line number	Diff line
		@@ -22,6 +22,7 @@ if ("${MCUBOOT_TARGET}" STREQUAL "esp32" OR
		set(MCUBOOT_ARCH "xtensa")
		elseif("${MCUBOOT_TARGET}" STREQUAL "esp32c3" OR
		"${MCUBOOT_TARGET}" STREQUAL "esp32c6" OR
		"${MCUBOOT_TARGET}" STREQUAL "esp32c2" OR
		"${MCUBOOT_TARGET}" STREQUAL "esp32h2")
		set(MCUBOOT_ARCH "riscv")
		endif()
		@@ -37,6 +38,8 @@ elseif("${MCUBOOT_TARGET}" STREQUAL "esp32c3")
		set(ESP_MIN_REVISION 3)
		elseif("${MCUBOOT_TARGET}" STREQUAL "esp32c6")
		set(ESP_MIN_REVISION 0)
		elseif("${MCUBOOT_TARGET}" STREQUAL "esp32c2")
		set(ESP_MIN_REVISION 0)
		elseif("${MCUBOOT_TARGET}" STREQUAL "esp32h2")
		set(ESP_MIN_REVISION 0)
		else()
		@@ -118,6 +121,8 @@ if (NOT DEFINED ESP_FLASH_FREQ)
		"${MCUBOOT_TARGET}" STREQUAL "esp32c3" OR
		"${MCUBOOT_TARGET}" STREQUAL "esp32c6")
		set(ESP_FLASH_FREQ "40m")
		elseif("${MCUBOOT_TARGET}" STREQUAL "esp32c2")
		set(ESP_FLASH_FREQ "60m")
		elseif("${MCUBOOT_TARGET}" STREQUAL "esp32h2")
		set(ESP_FLASH_FREQ "24m")
		endif()

0 → 100644

+29 −0

Original line number	Diff line number	Diff line
		# SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
		#
		# SPDX-License-Identifier: Apache-2.0

		list(APPEND hal_srcs
		${esp_hal_dir}/components/esp_hw_support/port/${MCUBOOT_TARGET}/rtc_init.c
		${esp_hal_dir}/components/hal/cache_hal.c
		${esp_hal_dir}/components/efuse/${MCUBOOT_TARGET}/esp_efuse_table.c
		${esp_hal_dir}/components/efuse/src/efuse_controller/keys/without_key_purposes/one_key_block/esp_efuse_api_key.c
		)

		if (DEFINED CONFIG_ESP_CONSOLE_UART_CUSTOM)
		list(APPEND hal_srcs
		${src_dir}/${MCUBOOT_TARGET}/console_uart_custom.c
		)
		endif()

		list(APPEND LINKER_SCRIPTS
		-T${esp_hal_dir}/components/esp_rom/${MCUBOOT_TARGET}/ld/${MCUBOOT_TARGET}.rom.newlib.ld
		)

		set_source_files_properties(
		${esp_hal_dir}/components/bootloader_support/src/esp_image_format.c
		${esp_hal_dir}/components/bootloader_support/bootloader_flash/src/bootloader_flash.c
		${esp_hal_dir}/components/bootloader_support/bootloader_flash/src/bootloader_flash_config_${MCUBOOT_TARGET}.c
		${esp_hal_dir}/components/hal/mmu_hal.c
		${esp_hal_dir}/components/hal/cache_hal.c
		PROPERTIES COMPILE_FLAGS
		"-Wno-logical-op")

0 → 100644

+30 −0

Original line number	Diff line number	Diff line
		/*
		* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
		*
		* SPDX-License-Identifier: Apache-2.0
		*/

		#define BOOTLOADER_BUILD 1
		#define CONFIG_IDF_FIRMWARE_CHIP_ID 0x000C
		#define CONFIG_IDF_TARGET_ESP32C2 1
		#define CONFIG_ESP32C2_REV_MIN_0 1
		#define CONFIG_ESP32C2_REV_MIN_FULL 3
		#define CONFIG_ESP_REV_MIN_FULL CONFIG_ESP32C2_REV_MIN_FULL
		#define CONFIG_ESP32C2_REV_MIN 3
		#define CONFIG_ESP32C2_REV_MAX_FULL 99
		#define CONFIG_ESP_REV_MAX_FULL CONFIG_ESP32C2_REV_MAX_FULL
		#define CONFIG_IDF_TARGET_ARCH_RISCV 1
		#define CONFIG_MMU_PAGE_SIZE 0x10000
		#define CONFIG_XTAL_FREQ_26 1
		#define CONFIG_XTAL_FREQ 26
		#define CONFIG_SPI_FLASH_ROM_DRIVER_PATCH 1
		#define CONFIG_MCUBOOT 1
		#define NDEBUG 1
		#define CONFIG_BOOTLOADER_WDT_TIME_MS 9000
		#define CONFIG_ESP_CONSOLE_UART_BAUDRATE 115200
		#define CONFIG_BOOTLOADER_OFFSET_IN_FLASH 0x0000
		#define CONFIG_PARTITION_TABLE_OFFSET 0x10000
		#define CONFIG_EFUSE_VIRTUAL_OFFSET 0x250000
		#define CONFIG_EFUSE_VIRTUAL_SIZE 0x2000
		#define CONFIG_EFUSE_MAX_BLK_LEN 256
		#define CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT 1

+2 −0

Original line number	Diff line number	Diff line
		@@ -27,6 +27,8 @@ extern int ets_printf(const char *fmt, ...);
		#define TARGET "[esp32c3]"
		#elif CONFIG_IDF_TARGET_ESP32C6
		#define TARGET "[esp32c6]"
		#elif CONFIG_IDF_TARGET_ESP32C2
		#define TARGET "[esp32c2]"
		#elif CONFIG_IDF_TARGET_ESP32H2
		#define TARGET "[esp32h2]"
		#else

0 → 100644

+21 −0

Original line number	Diff line number	Diff line
		/*
		* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
		*
		* SPDX-License-Identifier: Apache-2.0
		*/

		#include <esp_rom_uart.h>
		#include <hal/uart_ll.h>
		#include <soc/uart_periph.h>

		#if CONFIG_ESP_CONSOLE_UART_CUSTOM
		static uart_dev_t *alt_console_uart_dev = (CONFIG_ESP_CONSOLE_UART_NUM == 0) ?
		&UART0 :
		&UART1;

		void IRAM_ATTR esp_rom_uart_putc(char c)
		{
		while (uart_ll_get_txfifo_len(alt_console_uart_dev) == 0);
		uart_ll_write_txfifo(alt_console_uart_dev, (const uint8_t *) &c, 1);
		}
		#endif