1
课程详述
COURSE SPECIFICATION
以下课程信息可能根据实际授课需要或在课程检讨之后产生变动。如对课程有任何疑问，请
联系授课教师。
The course information as follows may be subject to change, either during the session because of unforeseen
circumstances, or following review of the course at the end of the session. Queries about the course should be
directed to the course instructor.
1.
课程名称 Course Title
机械设计与制造综合 I
Mechanical Design and Manufacturing I
2.
授课院系
Originating Department
系统设计与智能制造学院
School of System Design and Intelligent Manufacturing
3.
课程编号
Course Code
SDM232 (co-listed in MEE as ME303B)
4.
课程学分 Credit Value
3
5.
课程类别
Course Type
专业核心课
Core Course
6.
授课学期
Semester
春季学期 / 秋季学期
Spring semester / Fall semester
7.
授课语言
Teaching Language
中文和英文
Chinese-English bilingual
8.
授课教师、所属学系、联系方
式（如属团队授课，请列明其
他授课教师）
Instructor(s), Affiliation&
Contact
（For team teaching, please list
all instructors）
吴元庆
系统设计与智能制造学院
Yuanqing WU
School of System Design and Intelligent Manufacturing (SDIM)
Email: wuyq@sustech.edu.cn
9.
实验员/助教、所属学系、联系
方式
Tutor/TA(s), Contact
10.
选课人数限额(可不填)
Maximum Enrolment
（Optional）
2
11.
授课方式
Delivery Method
讲授
Lectures
习题/辅导/讨论
Tutorials
实验/实习
Lab/Practical
其它(请具体注明)
Other（Please specify）
总学时
Total
学时数
Credit Hours
32
0
32
0
64
12.
先修课程、其它学习要求
Pre-requisites or Other
Academic Requirements
ME102CAD 与工程制图 CAD and Engineering Drawing
13.
后续课程、其它学习规划
Courses for which this
course is a pre-requisite
机械设计与制造 2
Mechanical Design and Manufacturing 2
14.
其它要求修读本课程的学系
Cross-listing Dept.
无 NIL
教学大纲及教学日历 SYLLABUS
This course, SDM232 ‘Mechanical Design and Manufacturing I’, is the mechanical engineering (ME) stream module of
SDIM Integrative course. It offers the students basic knowledge in machine design essential to developing engineering
thinking and basic mechanical engineering skills in machine design and manufacturing.
The course first presents methods of analysis and design of machines, including study of displacements, velocities,
accelerations, and static and dynamic forces required for the proper design of mechanical linkages, cams, and geared
systems. Then it presents concepts and procedures for designing and manufacturing machine elements commonly
found in mechanical devices and systems, including cams, gears, and belt drives for mechanical power transmission,
shafts and bearings, etc. The course is complemented with extensive Computer-aided design (CAD) / Computer-aided
engineering (CAE) software practice and bite-sized lab sessions.
The course may serve either as a core course for year-two students majoring ME stream at SDIM, or as the ‘B Version’
of ME303 ‘Fundamentals of Machine Design’, a core course offered by the department of mechanical and energy
engineering.
External reference:
• SUSTech ME303: Fundamentals of Machine Design
• Michigan University ME250: Design and Manufacturing I
• MIT 2.007: Design and Manufacturing I
16.
预达学习成果 Learning Outcomes
By the end of this course, students should have mastered the following abilities:
• Be able to conduct structure analysis of mechanisms and calculate their degree of freedom.
• Be able to conduct kinematic and kinetic analysis of planar mechanisms.
• Be familiar with linkage mechanism, cam mechanism, gear mechanism and gear trains. Be able to conduct
fundamental design of these mechanisms.
• Be familiar with machine system and be able to conduct the efficiency, balance and fluctuation analysis.
• Be familiar with generally used machine elements and mechanical drives.
17.
课程内容及教学日历 （如授课语言以英文为主，则课程内容介绍可以用英文；如团队教学或模块教学，教学日历须注明
主讲人）
Course Contents (in Parts/Chapters/Sections/Weeks. Please notify name of instructor for course section(s), if
this is a team teaching or module course.)
3
Course Schedule
Week
In-class
Out of class
Lecture Title
Hour
Tutorial / Lab Practice
Hour
1
ME orientation
2
Research report
2
2
Introduction to theory of machines
2
Bite-sized lab: Kinematic pairs
2
3
Linkage mechanism
2
Bite-sized lab: linkages in practice 1
2
4
Kinematics analysis
2
Bite-sized lab: linkages in practice 2
2
5
Static analysis
2
Bite-sized lab: linkages in practice 3
2
6
Cam mechanism
2
Bite-sized lab: cam indexer disassembly
2
7
Gear mechanism
2
Bite-sized lab: comb paper binder and
paper shredder disassembly
2
8
Gear train
2
Bite-sized lab: bicycle speedhub
disassembly
2
9
Introduction to machine components
2
Bite-sized lab: components of cam
indexer and speedhub
2
10
Gear drive
2
Bite-sized lab: motorcycle gearbox
disassembly
2
11
Belt drive
2
Bite-sized lab: mini conveyor belt drive
disassembly
2
12
Chain drive
2
Bite-sized lab: motorcycle chain drive
disassembly
2
13
Shaft
2
Bite-sized lab: shaft design of bicycle
speedhub and motorcycle gearbox
2
14
Bearing
2
Bite-sized lab: bearing classification
2
15
Motor
2
Bite-sized lab: motor classification
2
16
Machine fabrication, assembly and
testing
2
Final report
2
4
18.
教材及其它参考资料 Textbook and Supplementary Readings
Textbook:
Lecture notes only.
Supplementary readings:
Norton, Robert L. Machine design: an integrated Approach, 4ed. Prentice hall, 2011.
Uicker, John Joseph, Gordon R. Pennock, and Joseph Edward Shigley. Theory of machines and mechanisms, 5ed.
New York, NY: Oxford University Press, 2017.
Mott, Robert L., and John Tang. Machine elements in mechanical design, 6ed. Upper Saddle River, NJ: Prentice Hall,
2014.
Shigley, Joseph Edward. Shigley's mechanical engineering design. McGraw-Hill Education, 2011.
20.
记分方式 GRADING SYSTEM
√ A. 十三级等级制 Letter Grading
B. 二级记分制（通过/不通过） Pass/Fail Grading
课程审批 REVIEW AND APPROVAL
21.
本课程设置已经过以下责任人/委员会审议通过
This Course has been approved by the following person or committee of authority
课程评估 ASSESSMENT
19.
Type of
Assessment
Assessment Time
% of final
score
Penalty
Notes
Quizzes, labs and
technical reports
Week 1-16
30
NIL
To assess students’ grasp of
coursework knowledge.
Designs,
simulations and
assemblies
Week 1-16
30
NIL
To assess students’ hands-on skills.
Semester-long
project prototype
Week 1-16
40
NIL
Test students’ knowledge and skills
through semester-long project of a
prototype making and functionality.
