Last updated on 2025-01-09 01:49:52 CET.
| Flavor | Version | Tinstall | Tcheck | Ttotal | Status | Flags |
|---|---|---|---|---|---|---|
| r-devel-linux-x86_64-debian-clang | 0.3.0 | ERROR | ||||
| r-devel-linux-x86_64-debian-gcc | 0.3.0 | 2.51 | 177.32 | 179.83 | ERROR | |
| r-devel-linux-x86_64-fedora-clang | 0.3.0 | 481.03 | ERROR | |||
| r-devel-linux-x86_64-fedora-gcc | 0.3.0 | 508.88 | ERROR | |||
| r-devel-windows-x86_64 | 0.3.0 | 6.00 | 312.00 | 318.00 | ERROR | |
| r-patched-linux-x86_64 | 0.3.0 | 3.42 | 280.41 | 283.83 | ERROR | |
| r-release-linux-x86_64 | 0.3.0 | 4.31 | 280.03 | 284.34 | OK | |
| r-release-macos-arm64 | 0.3.0 | 116.00 | OK | |||
| r-release-macos-x86_64 | 0.3.1 | 392.00 | OK | |||
| r-release-windows-x86_64 | 0.3.0 | 6.00 | 300.00 | 306.00 | OK | |
| r-oldrel-macos-arm64 | 0.3.0 | 114.00 | OK | |||
| r-oldrel-macos-x86_64 | 0.3.1 | 422.00 | OK | |||
| r-oldrel-windows-x86_64 | 0.3.0 | 7.00 | 408.00 | 415.00 | ERROR |
Version: 0.3.0
Check: tests
Result: ERROR
Running ‘testthat.R’ [179s/215s]
Running the tests in ‘tests/testthat.R’ failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/tests.html
> # * https://testthat.r-lib.org/reference/test_package.html#special-files
>
> library(testthat)
> library(QuantBondCurves)
>
> test_check("QuantBondCurves")
[ FAIL 1 | WARN 0 | SKIP 8 | PASS 172 ]
══ Skipped tests (8) ═══════════════════════════════════════════════════════════
• On CRAN (2): 'test-curvefunctions.R:77:3', 'test-curvefunctions.R:88:3'
• Test is for plotting curves (2): 'test-CurveCalibration.R:242:3',
'test-CurveCalibration.R:341:3'
• Test is for plotting the forward curve (1): 'test-curvefunctions.R:35:3'
• Test is for plotting the spot constant curve (1):
'test-curvefunctions.R:137:3'
• Test is for plotting the spot linear curve (1): 'test-curvefunctions.R:109:3'
• Test is to construct the plot of basis curve (1):
'test-bondValuation.R:700:3'
══ Failed tests ════════════════════════════════════════════════════════════════
── Error ('test-generalFunctions.R:331:5'): Discount factors have to be lower when using continously compounded interest rates ──
Error in `expect_compare("<=", act, exp)`: Result of comparison must be a single logical value
Backtrace:
▆
1. └─testthat::expect_lte(...) at test-generalFunctions.R:331:5
2. └─testthat:::expect_compare("<=", act, exp)
3. └─rlang::abort("Result of comparison must be a single logical value")
[ FAIL 1 | WARN 0 | SKIP 8 | PASS 172 ]
Error: Test failures
Execution halted
Flavor: r-devel-linux-x86_64-debian-clang
Version: 0.3.0
Check: tests
Result: ERROR
Running ‘testthat.R’ [104s/120s]
Running the tests in ‘tests/testthat.R’ failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/tests.html
> # * https://testthat.r-lib.org/reference/test_package.html#special-files
>
> library(testthat)
> library(QuantBondCurves)
>
> test_check("QuantBondCurves")
[ FAIL 1 | WARN 0 | SKIP 8 | PASS 172 ]
══ Skipped tests (8) ═══════════════════════════════════════════════════════════
• On CRAN (2): 'test-curvefunctions.R:77:3', 'test-curvefunctions.R:88:3'
• Test is for plotting curves (2): 'test-CurveCalibration.R:242:3',
'test-CurveCalibration.R:341:3'
• Test is for plotting the forward curve (1): 'test-curvefunctions.R:35:3'
• Test is for plotting the spot constant curve (1):
'test-curvefunctions.R:137:3'
• Test is for plotting the spot linear curve (1): 'test-curvefunctions.R:109:3'
• Test is to construct the plot of basis curve (1):
'test-bondValuation.R:700:3'
══ Failed tests ════════════════════════════════════════════════════════════════
── Error ('test-generalFunctions.R:331:5'): Discount factors have to be lower when using continously compounded interest rates ──
Error in `expect_compare("<=", act, exp)`: Result of comparison must be a single logical value
Backtrace:
▆
1. └─testthat::expect_lte(...) at test-generalFunctions.R:331:5
2. └─testthat:::expect_compare("<=", act, exp)
3. └─rlang::abort("Result of comparison must be a single logical value")
[ FAIL 1 | WARN 0 | SKIP 8 | PASS 172 ]
Error: Test failures
Execution halted
Flavor: r-devel-linux-x86_64-debian-gcc
Version: 0.3.0
Check: tests
Result: ERROR
Running ‘testthat.R’ [289s/333s]
Running the tests in ‘tests/testthat.R’ failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/tests.html
> # * https://testthat.r-lib.org/reference/test_package.html#special-files
>
> library(testthat)
> library(QuantBondCurves)
>
> test_check("QuantBondCurves")
[ FAIL 1 | WARN 0 | SKIP 8 | PASS 172 ]
══ Skipped tests (8) ═══════════════════════════════════════════════════════════
• On CRAN (2): 'test-curvefunctions.R:77:3', 'test-curvefunctions.R:88:3'
• Test is for plotting curves (2): 'test-CurveCalibration.R:242:3',
'test-CurveCalibration.R:341:3'
• Test is for plotting the forward curve (1): 'test-curvefunctions.R:35:3'
• Test is for plotting the spot constant curve (1):
'test-curvefunctions.R:137:3'
• Test is for plotting the spot linear curve (1): 'test-curvefunctions.R:109:3'
• Test is to construct the plot of basis curve (1):
'test-bondValuation.R:700:3'
══ Failed tests ════════════════════════════════════════════════════════════════
── Error ('test-generalFunctions.R:331:5'): Discount factors have to be lower when using continously compounded interest rates ──
Error in `expect_compare("<=", act, exp)`: Result of comparison must be a single logical value
Backtrace:
▆
1. └─testthat::expect_lte(...) at test-generalFunctions.R:331:5
2. └─testthat:::expect_compare("<=", act, exp)
3. └─rlang::abort("Result of comparison must be a single logical value")
[ FAIL 1 | WARN 0 | SKIP 8 | PASS 172 ]
Error: Test failures
Execution halted
Flavor: r-devel-linux-x86_64-fedora-clang
Version: 0.3.0
Check: tests
Result: ERROR
Running ‘testthat.R’ [5m/18m]
Running the tests in ‘tests/testthat.R’ failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/tests.html
> # * https://testthat.r-lib.org/reference/test_package.html#special-files
>
> library(testthat)
> library(QuantBondCurves)
>
> test_check("QuantBondCurves")
[ FAIL 1 | WARN 0 | SKIP 8 | PASS 172 ]
══ Skipped tests (8) ═══════════════════════════════════════════════════════════
• On CRAN (2): 'test-curvefunctions.R:77:3', 'test-curvefunctions.R:88:3'
• Test is for plotting curves (2): 'test-CurveCalibration.R:242:3',
'test-CurveCalibration.R:341:3'
• Test is for plotting the forward curve (1): 'test-curvefunctions.R:35:3'
• Test is for plotting the spot constant curve (1):
'test-curvefunctions.R:137:3'
• Test is for plotting the spot linear curve (1): 'test-curvefunctions.R:109:3'
• Test is to construct the plot of basis curve (1):
'test-bondValuation.R:700:3'
══ Failed tests ════════════════════════════════════════════════════════════════
── Error ('test-generalFunctions.R:331:5'): Discount factors have to be lower when using continously compounded interest rates ──
Error in `expect_compare("<=", act, exp)`: Result of comparison must be a single logical value
Backtrace:
▆
1. └─testthat::expect_lte(...) at test-generalFunctions.R:331:5
2. └─testthat:::expect_compare("<=", act, exp)
3. └─rlang::abort("Result of comparison must be a single logical value")
[ FAIL 1 | WARN 0 | SKIP 8 | PASS 172 ]
Error: Test failures
Execution halted
Flavor: r-devel-linux-x86_64-fedora-gcc
Version: 0.3.0
Check: tests
Result: ERROR
Running 'testthat.R' [182s]
Running the tests in 'tests/testthat.R' failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/tests.html
> # * https://testthat.r-lib.org/reference/test_package.html#special-files
>
> library(testthat)
> library(QuantBondCurves)
>
> test_check("QuantBondCurves")
[ FAIL 1 | WARN 0 | SKIP 8 | PASS 172 ]
══ Skipped tests (8) ═══════════════════════════════════════════════════════════
• On CRAN (2): 'test-curvefunctions.R:77:3', 'test-curvefunctions.R:88:3'
• Test is for plotting curves (2): 'test-CurveCalibration.R:242:3',
'test-CurveCalibration.R:341:3'
• Test is for plotting the forward curve (1): 'test-curvefunctions.R:35:3'
• Test is for plotting the spot constant curve (1):
'test-curvefunctions.R:137:3'
• Test is for plotting the spot linear curve (1): 'test-curvefunctions.R:109:3'
• Test is to construct the plot of basis curve (1):
'test-bondValuation.R:700:3'
══ Failed tests ════════════════════════════════════════════════════════════════
── Error ('test-generalFunctions.R:331:5'): Discount factors have to be lower when using continously compounded interest rates ──
Error in `expect_compare("<=", act, exp)`: Result of comparison must be a single logical value
Backtrace:
▆
1. └─testthat::expect_lte(...) at test-generalFunctions.R:331:5
2. └─testthat:::expect_compare("<=", act, exp)
3. └─rlang::abort("Result of comparison must be a single logical value")
[ FAIL 1 | WARN 0 | SKIP 8 | PASS 172 ]
Error: Test failures
Execution halted
Flavor: r-devel-windows-x86_64
Version: 0.3.0
Check: tests
Result: ERROR
Running ‘testthat.R’ [173s/211s]
Running the tests in ‘tests/testthat.R’ failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/tests.html
> # * https://testthat.r-lib.org/reference/test_package.html#special-files
>
> library(testthat)
> library(QuantBondCurves)
>
> test_check("QuantBondCurves")
[ FAIL 1 | WARN 0 | SKIP 8 | PASS 172 ]
══ Skipped tests (8) ═══════════════════════════════════════════════════════════
• On CRAN (2): 'test-curvefunctions.R:77:3', 'test-curvefunctions.R:88:3'
• Test is for plotting curves (2): 'test-CurveCalibration.R:242:3',
'test-CurveCalibration.R:341:3'
• Test is for plotting the forward curve (1): 'test-curvefunctions.R:35:3'
• Test is for plotting the spot constant curve (1):
'test-curvefunctions.R:137:3'
• Test is for plotting the spot linear curve (1): 'test-curvefunctions.R:109:3'
• Test is to construct the plot of basis curve (1):
'test-bondValuation.R:700:3'
══ Failed tests ════════════════════════════════════════════════════════════════
── Error ('test-generalFunctions.R:331:5'): Discount factors have to be lower when using continously compounded interest rates ──
Error in `expect_compare("<=", act, exp)`: Result of comparison must be a single logical value
Backtrace:
▆
1. └─testthat::expect_lte(...) at test-generalFunctions.R:331:5
2. └─testthat:::expect_compare("<=", act, exp)
3. └─rlang::abort("Result of comparison must be a single logical value")
[ FAIL 1 | WARN 0 | SKIP 8 | PASS 172 ]
Error: Test failures
Execution halted
Flavor: r-patched-linux-x86_64
Version: 0.3.0
Check: tests
Result: ERROR
Running 'testthat.R' [244s]
Running the tests in 'tests/testthat.R' failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/tests.html
> # * https://testthat.r-lib.org/reference/test_package.html#special-files
>
> library(testthat)
> library(QuantBondCurves)
>
> test_check("QuantBondCurves")
[ FAIL 1 | WARN 0 | SKIP 8 | PASS 172 ]
══ Skipped tests (8) ═══════════════════════════════════════════════════════════
• On CRAN (2): 'test-curvefunctions.R:77:3', 'test-curvefunctions.R:88:3'
• Test is for plotting curves (2): 'test-CurveCalibration.R:242:3',
'test-CurveCalibration.R:341:3'
• Test is for plotting the forward curve (1): 'test-curvefunctions.R:35:3'
• Test is for plotting the spot constant curve (1):
'test-curvefunctions.R:137:3'
• Test is for plotting the spot linear curve (1): 'test-curvefunctions.R:109:3'
• Test is to construct the plot of basis curve (1):
'test-bondValuation.R:700:3'
══ Failed tests ════════════════════════════════════════════════════════════════
── Error ('test-generalFunctions.R:331:5'): Discount factors have to be lower when using continously compounded interest rates ──
Error in `expect_compare("<=", act, exp)`: Result of comparison must be a single logical value
Backtrace:
▆
1. └─testthat::expect_lte(...) at test-generalFunctions.R:331:5
2. └─testthat:::expect_compare("<=", act, exp)
3. └─rlang::abort("Result of comparison must be a single logical value")
[ FAIL 1 | WARN 0 | SKIP 8 | PASS 172 ]
Error: Test failures
Execution halted
Flavor: r-oldrel-windows-x86_64